Philips AVENT SCF876 User Manual page 22

ENGLISH
24
Problem Possible cause
The appliance You have not put
does not generate water in the water
steam. tank.
There is too much
limescale buildup in
the water tank.
Steam is leaking The water tank lid is
from the water not closed correctly.
tank.
The jar is not
assembled correctly
on the main unit.
The steam outlet
on the water tank
lid is blocked by
contamination or
limescale buildup.
The steam inlet on
the jar lid is blocked
by contamination.
The ingredients The pieces in the jar
are not are too big.
completely
heated through.
There is too much
food in the jar.
There is too much or
too little water in the
water tank.
The steaming time is
too short.
The jar is not placed
on the main unit
correctly.
There is too much
limescale buildup in
the water tank.
Solution
Switch off and unplug the appliance,
and then add water to the water tank.
Descale the water tank. Refer to the
section "Descaling" in the chapter
"Cleaning and descaling".
Close the water tank lid correctly. Make
sure the icon on the water tank lid is
lined up with the icon on the water
tank.
Place the jar correctly on the main unit.
Clean the steam outlet on the water tank
lid.
Clean the steam inlet on the jar lid.
Cut the food into smaller pieces (cubes
no bigger than 1 cm).
Decrease the amount of food in the jar.
Add the correct amount of water
according to the steaming time. Check
the recipe booklet and/or the table in
the chapter "Ingredients and steaming
time" to make sure that you add the
correct amount of water according to the
steaming time for the ingredients you
want to steam or the recipe you want to
prepare.
Select a longer steaming time
(30 minutes tops).
Place the jar on the main unit correctly
with the jar lid on the bottom.
Descale the water tank. Refer to the
section "Descaling" in the chapter
"Cleaning and descaling".