Connecting The Video Cable - Philips 810H User Manual

Step 1: Basic Recorder Connections
AN-
TENNA
TV

Connecting the video cable

This connection enables you to view the
disc playback from the recorder.
You only need to choose one of the
options below to make your video
connection.
Option 1: Using a SCART cable
Use a SCART cable (not supplied) to
connect the EXT1 TO TV-I/O scart
socket on the recorder to the
corresponding SCART input socket on
the TV.
Helpful Hints:
– If your TV set displays a selection for the
SCART socket, select 'VCR' as the source for
the SCART socket.
– The EXT2 AUX-I/O scart socket is
intended only for additional devices.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
S-VIDEO
EXT 2
AUX - I/O
(Y/C)
EXT 1 TO TV - I/O
AUDIO / VIDEO OUT
Option 2
Option 1
VIDEO
(CVBS)
L
AUDIO
R
COAXIAL
DIGITAL AUDIO OUT
OR
OR
Option 2: Using an S-Video cable
Use an S-video cable (not supplied) to
connect the S-VIDEO(Y/C) socket on
the recorder to the S-Video input socket
(or labelled as Y/C or S-VHS) on the TV.
Audio connection is required in order
to hear the sound, see next section
"Connecting the audio cables".
Option 3: Using a Video (CVBS)
cable
Use a composite video cable (yellow -
not supplied) to connect the VIDEO
(CVBS) socket on the recorder to the
video input socket (or labelled as A/V In,
Video In, Composite or Baseband) on the
TV.
Audio connection is required in order
to hear the sound, see next section
"Connecting the audio cables".
(continued)
Option 3
TV
15