DeWalt DCT411 Instruction Manual page 4

inspection camera. Inspection cameras are dangerous in the
hands of untrained users.
b) Use the inspection camera, accessories and tool bits,
etc. in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the inspection camera for operations
different from those intended could result in a hazardous
situation.
Battery Tool Use and Care
a) Recharge only with the charger specified by D
charger that is suitable for one type of battery pack may create
a risk of fire when used with another battery pack.
b) When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
c) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
Safety Information for Inspection Cameras
WARNING: Do not disassemble or modify the inspection
camera. There are no serviceable parts inside. If you need
assistance contact D WALT at 1-800-4-D
E
go to http://www.dewalt.com on the Internet.
• Do not operate the inspection camera in explosive
atmospheres, such as in the presence of flammable liquids,
gases, or dust. Inspection cameras create sparks which may
ignite the dust or fumes.
• The inspection camera should only be used with specifically
• Store the inspection camera out of reach of children and
• Do not disassemble the inspection camera. There are no user
• Do not use anywhere the unit may come into exposure with
WALT. A
E
• Do not operate inspection camera near moving machinery.
• Do not use the inspection camera around corrosive
• Do not use the camera if condensation forms inside the
• Do not remove or deface warning labels.
excessive heat such as sunshine, fire or the like.
camera cable to come into contact with live wires. Shut off
WALT (1-800-433-9258) or
E
circuit breakers to the entire area to avoid injury.
are NOT safety glasses. Also use face or dust mask if cutting
operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
2
designated D WALT batteries. Use of any other batteries may
E
create a risk of fire.
other untrained persons. Tools are dangerous in the hands of
untrained users.
serviceable parts inside.
moving parts, hazardous chemicals, or electrical charges.
Such situations may result in serious injury or death; such as walls,
pipes, automobiles, and machinery.
Can result in injury if the camera cable gets caught into moving
parts and pulls the user in.
chemicals. Exposure to corrosive, oily environments can ruin the
plastic covering on the camera head and ruin the picture quality.
lens. Let the water evaporate before using again.
WARNING: Do not expose camera, monitor or battery to
WARNING: Shock hazard. Do not allow the inspection
WARNING: ALWAYS use safety glasses. Everyday eyeglasses
• ANSI Z87.1 eye protection (CAN/CSA Z94.3).