Table of Contents
Advertisement
Clip and text memo forward/rewind
1
Switch to playback or a still image or other image dis-
play state.
Overview of all clip playback transitions
This unit allows you to vary audio and video playback speed. The figure below shows speed and transition changes.
Data in boxes: Status and speed
Arrows:
Possible direction of transition
Arrow text:
Cursor button operation
• Asterisks (*) in the diagram indicate stepwise changes in speed.
Example: Pressing the right cursor button during [PLAY]
double speed playback (SHTL + 2.0) and each press of the button
increases the speed gradually towards the SHTL MAX setting.
–SHTL MAX setting
Right
SHTL – *
Rewind by frame
Rewind by clip
Repeat playback
Play back playable clips repeatedly.
1
Press [MENU] to display the menu.
(➝ "Menu Operations" page 89)
2
Set the "REPEAT PLAY" (➝ page 97) menu item to
"ON."
3
Close the menu.
Left
Right
Right
Right
Left
SHTL + 0.0
Down
PREV
2
Press the [PREV] button or [NEXT] button.
The clip beginning or text memo position is located in accor-
dance with the "SEEK POS SEL" (➝ page 98) menu item.
results in
Right
SHTL + 2.0
Right
Left
SHTL + 1.0
Right
Left
SHTL + 0.67
Left
SHTL + 0.*
Left
Forward by frame
Up
NEXT
Forward by clip
4
Press the [PLAY]
All clips are played repeatedly.
• Repeat playback continues until the [STOP]
is pressed.
• Repeat playback is not performed during playback other
than normal playback, for example, variable playback,
and playback stops at the beginning (BOS) or end (EOS)
of a playable clip.
• During repeat playback, "REPEAT PLAY" is displayed for
the operating status on the OSD.
Main Mode: Recording/Playback Screen
+SHTL MAX setting
Right
Left
SHTL + *
Left
Right
PLAY
Left
button to start playback.
button
39
Advertisement
Table of Contents
