Panasonic AJ-PG50EJ Operating Instructions Manual page 33

Dual codec (proxy) recording
Simultaneously record video as well as time-code data and other real-time data in H.264 format to a P2 card or SD memory card
separately from the main video and audio material recorded with the unit.
(➝ "DUAL CODEC SETUP" page 99 menu item)
 Recording modes and recording signals (video and audio)
Recording mode
Resolution
1080i mode
480 x 270
LOW 2CH MOV
1080 59.94/50p mode
320 x 180
HQ 2CH MOV 640 x 360
960 x 540
SHQ 2CH MOV
AVC-G6 2CH MOV 1920 x 1080
 Recording proxy data
Set the "CODEC USAGE" (➝ page 99) menu item to "PROXY
REC(P2)" or "PROXY REC(P2&SD)" and then press the
[PLAY] button while holding down the [REC]
to start proxy recording simultaneously with the recording of
the main material.
• You can check detailed information on the recorded proxy
data from the properties of the clip.
(➝ "Viewing the clip metadata information" page 50)
• Proxy data is recorded to a P2 card or SD memory card as
a video and audio file and a real-time data file.
Video and audio file: .MOV
Real-time metadata file: .BIN
The time code, user bits, and other information are record-
ed on a frame basis.
Note:
• Dual codec recording is not possible in the following modes.
- LOOP REC
- SIMUL REC
- 480-59.94i or 576-50i
- AVC-I200
• When "1080-59.94p" or "1080-50p" is set for the "LINE&FREQ"
(➝ page 114) menu setting, recording is not possible.
• "AVC-G6 2CH MOV" cannot be recorded when the "REC
FORMAT" menu item (➝ page 114) is set to "DVCPRO HD",
"AVC-G12", or "AVC-I50".
• When "ONE FILE" is set for the "FILE SPLIT" menu item (➝ page
98), recording is not possible.
• To record the proxy data, use SD, SDHC, or SDXC memory
cards with an indication of class 2 or higher. If the recording for-
mat of the proxy data is "SHQ 2CH MOV" or "AVC-G6 2CH
MOV", use a card of class 4 or higher.
• The SD memory card access lamp lights green during the re-
cording of proxy data to the SD memory card.
• If short recordings are repeated, the available recording time
may decrease significantly compared to the available space.
Video
Codec Bit rate
H.264
800 kbps
Baseline Profile
H.264
1500 kbps
High Profile
H.264
3500 kbps
High Profile
H.264
6 Mbps
High Profile
• When the number of clips becomes 1,000 or more, proxy data
button
• Shot marks and text memos cannot be added to clips in an SD
• Even if you delete the clips recorded to the P2 card in the
 Checking proxy data
• The
• Check the proxy data in P2 Viewer Plus. The data may not
• Proxy data cannot be played with the unit.
Number of chan-
Codec
AAC-LC 2 channels
AAC-LC 2 channels
Linear PCM 2 channels
AAC-LC 2 channels
cannot be recorded to the SD memory card even if there is free
space remaining. Check the number of clips recorded to the SD
memory card in "NUMBER OF CLIP" of the "SD CARD PROPER-
TY" (➝ page 111) menu item.
memory card.
thumbnail screen, the proxy data recorded to the SD memory
card will not be deleted.
indicator is displayed for a clip of material for which
proxy data recording was performed.
be able to be checked depending on the version of P2
Viewer Plus. For information on P2 Viewer Plus, visit the
Panasonic website. (➝ "Website URL" page 9)
Main Mode: Recording/Playback Screen
Audio
Bit rate per channel
nels
64 kbps
64 kbps
768 kbps
64 kbps
33