Related Manuals for Siemens WN34A1U8GB
Summary of Contents for Siemens WN34A1U8GB
- Page 1 Washer dryer WN34A1U8GB siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Cleaning and maintenance . . . 41 Intended use Appliance housing/control panel . . . 41 Drum ......42 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility. - Page 7 Safety instructions If you take hold of any of the Warning ■ appliance's protruding parts Risk of electric shock/fire/ (e.g. the appliance door) in material damage/damage to order to lift or move it, these the appliance! parts may break off and If the appliance's mains cable is cause injury.
-
Page 8: Operation
Safety instructions The appliance is secured for Caution! ■ transportation by transport Material damage/damage to locking devices. If the the appliance transport locking devices are If the water pressure is too ■ not removed before the high or too low, the appliance is operated, this appliance may not be able to may result in damage to the... - Page 9 Safety instructions Do not use the appliance if During the last part of the ■ ■ industrial chemicals have drying cycle, the laundry in been used to clean the the drum is not heated laundry. (cooling cycle). This is to ensure that it remains at a Warning temperature at which it will...
- Page 10 Safety instructions If you reach into the drum Caution! ■ while it is still rotating, you Material damage/damage to risk injuring your hands. the appliance Wait until the drum has If the amount of laundry in ■ stopped rotating. the appliance exceeds its maximum load capacity, it Warning may not be able to operate...
-
Page 11: Cleaning/Maintenance
Safety instructions Cleaning/Maintenance Warning Risk of electric shock/material Warning damage/damage to the Risk of death! appliance! The appliance is powered by If moisture penetrates the electricity. There is a risk of appliance, this may cause it to electric shock if you come into short circuit. -
Page 12: Environmental Protection
Environmental protection Reduce the washing temperature for Environmental lightly and normally soiled laundry. protection At low temperatures, the appliance ■ consumes less energy. For light to P ackaging/used appliance normal soiling, lower temperatures E n v i r o n m e n t a l p r o t e c t i o n than indicated on the care label are Dispose of packaging in an also sufficient. -
Page 13: Positioning And Connecting
Positioning and connecting Bag: Positioning and Installation and operating ■ connecting instructions Customer Service location ■ S tandard accessories directory* P o s i t i o n i n g a n d c o n n e c t i n g Warranty* ■... -
Page 14: Installation Surface
Positioning and connecting If the hose and mains cables are not On wooden joist floors, install the Note: ■ routed properly, there is a risk of appliance: tripping and injury. In a corner, if possible, ■ Lay hoses and cables in such a way On a water-resistant wooden board ■... - Page 15 Positioning and connecting b) Remove the sleeves. Take the hoses out of the holders. Fit the covers. Unscrew and remove all four Lock the covers firmly in place by transport brace screws. applying pressure to the snap-in hooks. a) Remove the mains cable from the holders.
-
Page 16: Removing The Support Struts
Positioning and connecting Removing the support struts Connection on right side Unscrew and remove all screws in the vertical transport struts. ( ~ 60 cm 0 ~ 195 cm Remove the transport struts. 8 ~ 140 cm @ 60 cm ~ 100 cm If the supply hose is too short for Note: your connection, you can order an... -
Page 17: Water Outlet
Positioning and connecting Do not bend, squash, modify or cut – Model: Aqua-Stop ■ through the water supply hose (otherwise its strength is no longer guaranteed). Only tighten the screw connections ■ by hand. If the screw connections are tightened too much with a tool (pliers), the thread may be damaged. -
Page 18: Alignment
Positioning and connecting Caution! Drainage into a plastic pipe with ■ rubber bushing or into a drainage Damage to the appliance/fabrics If the end of the drain hose is immersed in the drained water, water may be sucked back into the appliance and may damage the appliance/fabrics. -
Page 19: Electrical Connection
Positioning and connecting Check the alignment of the Notes appliance with a spirit level, and The mains voltage and voltage ■ adjust it if necessary. Change the indicated on the appliance (rating height by turning the appliance feet. plate) are the same. All four appliance feet must stand The connected load and fuse firmly on the ground. -
Page 20: Transportation
Positioning and connecting Insert mains plug. Installing the transport locks: Turn the water tap on. Remove the covers and keep them Close the door. Do not load any in a safe place. laundry. Use a screwdriver if Note: Select the Cottons 90°C necessary. - Page 21 Positioning and connecting b) Insert and tighten the screws. c) Clip the hoses securely in the holders. Before switching on the appliance again: Notes The support struts must be ■ removed. ~ "Removing the support struts" on page 16 The transport braces must be ■...
-
Page 22: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 23: Control Panel
Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 34 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 35 Start Reload button for starting, interrupting, (e.g. -
Page 24: Display Panel
Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting Drying Aim Ô ¾/»/Ø Display Setting Description Prewash Ž - 90° Temp. °C Temperature that Less Ironing can be set in °C æ varioSpeed Ž = cold 2 - 1400* Spin Speed Spin speed in rpm Status indicators for the programme... -
Page 25: Laundry
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■... -
Page 26: Preparing Laundry For Drying
Laundry Preparing laundry for drying Starching To ensure an even drying result, Laundry should not be treated Note: Note: sort the laundry according to the: with fabric softener. Type of fabric ■ Switch on the appliance. Care symbols which are indicated on ■... -
Page 27: Detergents And Care Products
Detergents and care products Detergents and care products Y ou can protect your appliance and D e t e r g e n t s a n d c a r e p r o d u c t s your laundry by selecting and using the correct detergents and care products. -
Page 28: Detergent Recommendation
Detergents and care products Detergent recommendation This information is intended to help you to choose the right detergent for your items. Fabrics Detergent Programme Temperature Heat-resistant white fab- Standard detergent with optical Cottons From cold up to 90 °C rics made from cotton or brighteners linen Coloured fabrics made... -
Page 29: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max. - Page 30 Overview of programmes Programme/Type of laundry Options/Information Eco 40-60 8,0 kg/5,0 kg Suitable for washing normally soiled cotton,linen and mixed fab- ric textiles, and drying it to be immediately stored in a cupboard. 400 - 1400 rpm Notes Prewash, Less Ironing Textiles which are washable based on the laundry symbol ■...
- Page 31 Overview of programmes Programme/Type of laundry Options/Information Shirts 2,0 kg/2,0 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres Ž - 60 °C or blended fabrics. 400 - 800 rpm Prewash, Less Ironing Drying Aim Ô è (¾-, » è, Ø è) possible Rapid 15' / Wash &...
- Page 32 Overview of programmes Programme/Type of laundry Options/Information Delicate/Silk 2,0 kg/- For delicate, washable fabrics, e.g. made of silk, satin, synthetic Ž - 40 °C fibres or blends (e.g. silk blouses, silk scarves). 2 - 800 rpm Prewash, Less Ironing Drying Aim Ô - possible Ô...
-
Page 33: Drying Table
Overview of programmes Drying table Estimated drying time (min) Recommended drying programme Drying load Ø (IronDry) » (Cup- ¾ (Cup- (kg) boardDry) boardDry+) 0.5-2.0 40-70 40-90 60-100 Ô Intensive Dry 2.0-3.0 70-90 90-120 100-130 3.0-5.0 90-130 120-210 130-240 0.5-1.5 20-50 30-60 70-120 Ô... -
Page 34: Programme Default Settings
Programme default settings Ready in/Time Dry Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 0.5h (h = hour) Y ou can change the default settings for increments (between “minimum P r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 35: Additional Programme Settings35
Additional programme settings Ø (IronDry): For delicate laundry. Additional programme Fabrics suitable for ironing (iron fabrics in order to avoid creasing). Garments settings can be additionally hung up to dry. You can find possible additional N ote: The drying process would proceed A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;... -
Page 36: Variospeed
Operating the appliance varioSpeed Turn the water tap on. Washing in a shorter time while achieving a washing result that is consistent with the normal performance. Touch varioSpeed to activate or deactivate this additional programme setting. With the varioSpeed additional Note: programme setting activated, the maximum load of washing will be... -
Page 37: Placing Laundry Into The Drum
Operating the appliance Placing laundry into the drum Dosing and adding detergent and care products Open the door, place laundry in the drum, make sure that no items of Caution! laundry are trapped between the door Damage to the appliance and the rubber seal, and close the door. -
Page 38: Starting The Programme
Operating the appliance Pour in detergent and/or cleaning Pull out the detergent drawer. Press product. down the insert and fully remove the drawer. Dispenser I Detergent for pretreat and clothing disinfectant. (only for Slide the measuring aid forwards, the appliance with pretreat and fold it down and click it into place. -
Page 39: Childproof Lock
Operating the appliance Childproof lock Notes Do not leave the door open for too ■ You can lock the appliance to prevent long when adding laundry as water the settings you have set from being from the laundry may leak out. changed inadvertently. -
Page 40: Programme End
Appliance settings Programme end Wipe the rubber seal dry. ■ “Ÿš lights up on the display and À and Õ displays are off. If you have selected 2, the water is only drained after rinse process, no spin cycle. Notes If •©£... -
Page 41: Sensors
Sensors If the laundry is extremely unevenly Activate setting mode: Set the programme selector to distributed, the spin speed is reduced position 1. The appliance is switched or the spin cycle is not performed for safety reasons. Touch and hold the Spin Speed Place large and small items of Note: button and, at the same time, turn... -
Page 42: Drum
Cleaning and maintenance Do not clean the appliance with a Emptying the detergent draw, ■ water jet. cleaning the detergent drawer and its housing Drum If the appliance contains detergent or Warning fabric softener residues: Risk of injury/material damage/ Pull out the detergent drawer. Press damage to the appliance! down the insert and fully remove the Permanently washing at low... -
Page 43: Drain Pump Is Blocked
Cleaning and maintenance Fit the insert and lock it in place Open the service flap. (push the cylinder onto the guide pin). Take the drain hose out of the retainer. Push in the detergent drawer. Remove the sealing cap and pour the water out into a suitable container. -
Page 44: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Refit and screw on the pump cover. Re-attach the drain hose and secure The handle must be in a vertical the connection point using the hose position. clamp. Filter in the water supply is blocked Release water pressure in the supply hose: Turn off the water tap. -
Page 45: Faults And What To Do About Them
Faults and what to do about them Clean the filter with a small brush. Warning Risk of injury! Reaching into the drum while it is still turning may cause hand injuries. Do not reach into the drum when it is turning. -
Page 46: Information On The Display Panel
Faults and what to do about them Information on the display panel Display Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Õ ■ Close the door, continue the programme with Start Reload button or select Drain. -
Page 47: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy H:32 The unbalanced load detection system has interrupted the spin cycle because the alternating with laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum. “Ÿš when programme is finished Other displays... - Page 48 Faults and what to do about them Faults Cause/Remedy The water is not draining. Drain pipe or water drain hose is blocked. Clean the drain pipe and the ■ water drain hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain ■...
- Page 49 Faults and what to do about them Faults Cause/Remedy The spin cycle runs sev- Not a fault – the unbalanced load detection system is adjusting an imbalance. eral times. The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■...
- Page 50 Faults and what to do about them Faults Cause/Remedy Creasing. Creasing occurs when you have exceeded the maximum load or selected ■ the wrong program for the type of fabric. All the required information can be found in the programme overview table. Remove clothes immediately after drying;...
-
Page 51: Customer Service
Customer Service If you contact Customer Service, you Customer Service will require the product number (E-Nr.) and the production number (FD) of your I f you have any queries on use, are appliance. C u s t o m e r S e r v i c e unable to rectify faults on the appliance The contact details for Customer yourself or if your appliance needs to be... -
Page 52: Consumption Values
Consumption values Consumption values T he following information is provided in accordance with the EU-Ecodesign- C o n s u m p t i o n v a l u e s Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456 and EN62512. -
Page 53: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 84,8 cm x 59,8 cm x 59,0 cm In addition to warranty claims against (height x width x depth) - Page 56 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001550863* 9001550863 (0012)