Table of Contents
Advertisement
Operating your machine
Buzzer sound setup
Setting up the buzzer.
1- Press the Power On/Off touch button".(1) (if it is in OFF position).
2- Press and hold the "Tablet/Energy Save" (5) and "Extra Fast/Silent" (7,8) touch
buttons for 3 seconds at the same time to set the volume level.
3- While pressing the "Tablet/Energy Save" (5) and "Extra Fast/Silent" (7,8) touch
buttons, the display shows a of count down from 3 to 1.
• The first time the volume is adjusted, at the end of 3 seconds, "S03" is shown on
the display.
• If the volume has been adjusted before, at the end of 5 seconds the previously
selected level is shown on the display (from ''S00'' to ''S03'').
The volume level is increased or decreased using the ''Tablet'' and "Extra Fast/
Silent" (7,8) touch buttons, as follows;
- To increase the buzzer volume
1) Press the "Extra Fast/silent" touch button (5).
2) The display (3) changes from "S00" to "S03
- To decrease the buzzer volume
1) Press the "Tablet/Energy Save" touch button (5).
2) The display (3) changes from "S03" to "S00". "S00" means that all buzzers
are off
4- To exit volume adjustment mode, switch off the machine.
The last volume level selected will be stored in memory.
Note: From level sound ''3'' to ''1'', loudness level is reduced in stages.
(10)
(1)
(2)
(9)
(4)
(5)
(3)
(6) (7)
36
(8)
Advertisement
Table of Contents
