SAFETY WARNINGS PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • Connection to a good earth wiring system is essential and mandatory.
Page 3
• This appliance is to be properly installed and earthed only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. • WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance.
Page 4
• During use, accessible parts of this appliance will become hot enough to cause burns. • Do not let your body, clothing or any item other than suitable cookware contact the ceramic glass until the surface is cool. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get •...
Page 5
• Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. • Do not leave children alone or unattended in the area where the appliance is in use. •...
Page 6
• Care should be taken to avoid touching heating elements. • Children less than 8 years of age shall be kept away unless continuously supervised. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the...
1. max. 1800 W zone 2. max. 1200 W zone 3. max. 1800 W zone 4. max. 1200 W zone 5. Control panel UBTCC60AL 1. max. 1800 W zone 2. max. 1200 W zone 3. max. 1800 W zone 4. max. 1200 W zone 5.
Page 8
1. max. 1800/2200 W zone 2. max. 1400 W zone 3. max. 1800 W zone 4. max. 1400 W zone 5. Control panel UBIND60BVW The Control Panel UBTCC60AL UBTCC60BVW UBIND60AL UBIND60BVW 1. ON/OFF switch 4. Child lock 2. Select power level 5.
Product Information The ceramic/induction hob can meet different kinds of cuisine demands because of resistance wire heating, micro-computerized control and multi-power selection, really the optimal choice for modern families. The hob centers on customers and adopts personalized design. The hob has safe and reliable performances, making your life comfortable and enabling to fully enjoy the pleasure from life.
Choosing the right Cookware Only use cookware with a base suitable for induction cooking. Look for the • induction symbol on the packaging or on the bottom of the pan. • You can check whether your cookware is suitable by carrying out a magnet test.
Using your Hob To start cooking After power on, the buzzer beeps once, all the indicators light up for 1 second then • go out, indicating that the hob has entered the state of standby mode. 1. Touch the ON/OFF switch.
Page 12
Beware of hot surfaces “H” will show which means cooking zone is too hot to touch. It will disappear when the surface has cooled down to a safe temperature. It can also be used as an energy saving function if you want to heat further pans, use the hotplate that is still hot.
Locking the Controls • You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on). When the controls are locked, all the controls except the ON/OFF control are • disabled. To lock the controls Touch the keylock control.
Using the Timer You can use the timer in two different ways: You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up. You can use it as cut-off timer to turn one or more cooking zones off after time is * You can set the timer up to 99 minutes.
Page 15
6. When the time is set, it will begin to count down immediately. The display will show the remaining time. 7. Buzzer will bips for 30 seconds and the timer indicator shows “- - “ when the setting time finished. Using the timer to switch off one or more cooking zones 1.
Page 16
7. When cooking timer expires, the corresponding cooking zone will be switch off automatically. Note: Other cooking zones will keep operating if they are turned on previously. If the timer is set on more than one zone: When you set timer for several cooking zones, red dots of the relevant cooking zones are indicated.
Cooking Guidelines ke care when frying as the oil and fat heat up very quickly, particularly if you’re using Boost. At extremely high temperatures oil and fat will ignite spontaneously and this presents a serious fire risk. Cooking Tips When food comes to the boil, reduce the power setting. •...
Care and Cleaning What? How? Important! Everyday soiling on 1. Switch the power to the cooktop off. • When the power to the cooktop is glass (fingerprints, 2. Apply a cooktop cleaner while the switched off, there will be no ‘hot marks, stains left by glass is still warm (but not hot!) surface’...
Hints and Tips Problem Possible causes What to do The cooktop cannot No power. Make sure the cooktop is connected to Be turned on. the power supply and that it is switched on. Check whether there is a power outage in your home or area. If you’ve checked everything and the problem persists, call a qualified technician.
The above are the judgment and inspection of common failures. Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction hob. Technical Specification Ceramic Hob UBTCC60AL UBTCC60BVW Cooking Zones 4 Zones Supply Voltage...
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm) 50 mini UBTCC60AL 50 mini UBTCC60BVW 50 mini UBIND60AL 50 mini UBIND60BVW Under any circumstances, make sure the hob is well ventilated and the air inlet and outlet are not blocked. Ensure the hob is in good work state. As shown below Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760mm.
Page 23
A(mm) B(mm) C(mm) 50 mini 20 mini Air intake Air exit 5mm Before you install the hob, make sure that the work surface is square and level, and no structural members interfere with space • requirements. the work surface is made of a heat-resistant material. •...
Before locating the fixing brackets The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the hob. Locating the fixing brackets The unit should be placed on a stable, smooth surface (use the packaging). Do not •...
Page 25
Connecting the hob to the mains power supply The power supply should be connected in compliance with the relevant standard, or a single-pole circuit breaker. The method of connection is shown below. UBTCC60AL/UBTCC60BVW UBIND60AL/UBIND60BVW If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents.
Page 28
For more detailed information about treatment, recovery and recycling of this for special treatment is product, please contact your local city office, your household waste disposal necessary. service or the shop where you purchased the product. UBTCC60AL&UBTCC60BVW&UBIND60AL &UBIND60BVW User Manual v.20180123...
Need help?
Do you have a question about the UBTCC60AL and is the answer not in the manual?
Questions and answers