Tuning Of The Channels; Automatic Tuning - Sanyo CP14SA1G Instruction Manual

Tuning of the Channels

Up to 100 broadcast stations in your reception area can be stored in the electronic
memory.
There are three ways of tuning as follows;
1. Automatic Tuning (the basic way):
All receivable channels are automatically tuned in and memorized in consecutive programme
position.
2. Semi-Auto Tuning:
Use to preset a receivable channel in any desired programme position, e.g. the position with the
same number as the channel.
3. Manual Tuning:
Manually tune a channel if it cannot be automatically tuned, such as when the signal is poor.

Automatic Tuning

1 Press the MENU button for MAIN menu
display.
PICTURE PICTURE
PRESET
SELECT ENTER
(MAIN MENU)
2 Select "PRESET" by pressing the
Programme UP or DOWN button.
PICTURE PICTURE
PRESET
3 Press the VOLUME + or - button for
PRESET menu display. On entering
PRESET display, Automatic Tuning will
be selected initially.
MODE
AUTO
SEARCH START
POSITION 1
SELECT ADJUST
12
EXIT
M
P P BACK
EXIT
M
4 Select "SEARCH" by pressing the
Programme UP or DOWN button.
MODE
AUTO
SEARCH START
POSITION 1
SELECT ADJUST
5 Press the VOLUME (+) button to start
channel tuning.
P
P
After all receivable channels have been found
and stored, the TV set automatically returns
to programme position "1".
The Automatic Tuning operation can be
cancelled at any time by pressing the
Programme UP or DOWN button.
P P BACK
EXIT
M
1