Related Manuals for Sanyo CP14G1(C)
Summary of Contents for Sanyo CP14G1(C)
- Page 1 CP14G1(C) INSTRUCTION MANUAL CA14G1C CP14SA1(C) Colour Television CP14SR1(C) CP20SR1(C) CP21G1(C) CA21G1C CP21SA1(C) CA21SA1C Multi System CATV Hyper Band 256 Programmes with Automatic Tuning...
-
Page 2: Warnings And Cautions
Warnings and Cautions Caution Warning High voltages are used in the operation of this When the television receiver is not used for an television receiver. Do not remove the cabinet extended period of time, it is advisable to discon- back from your set. Refer servicing to qualified nect the AC power cord from the AC outlet. -
Page 3: Table Of Contents
Contents Plug & Play Multi Personal Preference Level Warnings and Cautions ....2 Contents ......3 Note: For model CA14G1C, CA21G1C, Plug &... -
Page 4: Aerial Connection
Aerial Connection Connecting Outdoor Aerial Connect the cable with a plug from a UHF (or VHF) aerial to the aerial socket on the cabinet back. Mounting Telescopic Aerial Outdoor Aerial Model CP14G1(C), CA14G1C, CP14SA1(C), CP14SR1(C), CP20SR1(C) Telescopic Telescopic Aerial Aerial Feeder Cabinet Back Aerial Cable Aerial Socket... -
Page 5: Front Control
Each button listed in this section has the same function as it’s Front Control corresponding button on the remote control. Model CP14SR1(C) GA ME PO WE R Video Input Jack Mains ON/OFF Button Remote Control Detector Audio Input Jack Stand-by and Power Indicator TV/AV Selector Programme UP/DOWN VOLUME... -
Page 6: Remote Control Transmitter
Remote Control Transmitter TIMER button TV / AV TV / AV Selector button Power ON/OFF button TIMER RECALL/COLOUR SYSTEM button MUTE button Programme Selector button -/- - -/- - ALTERNATE button DIGIT button Programme UP button SWAP CH SCAN CHANNEL SCAN button SWAP button VOLUME - button VOLUME + button... -
Page 7: General Operation
-/- - General Operation -/- - -/- - Power ON/OFF Programme Up and Down To switch on or off the TV ; Press the Programme UP (CH ) button -/- - -/- - Press the Mains ON/OFF button. to select the next programme position. -/- - -/- - -/- -... -
Page 8: Alternate
General Operation If no operation is performed after the TV has ALTERNATE been switched on by the ON TIMER, such as Press the ALTERNATE button, and the pro- if you are not at home, the TV will be auto- gramme position will alternately select the matically switched off after approximately 2 previous position and the present position. -
Page 9: Picture Adjustment
Colour and Sound System To select sound system: Broadcast Transmission System List Press the SOUND SYSTEM button to select the sound system directly. The sound system will Colour Sound Country Area System System be memorized automatically. Union of Arab Emirates, Middle Kuwait, Oman, Qatar, East... -
Page 10: Basic Picture Adjustment Operation
Picture Adjustment Basic Picture Adjustment Operation return Main menu, press Press the MENU button for MAIN menu ALTERNATE button. display. To return to the normal TV mode, press the MENU button. ( Or will automatically return to PICTURE PRESET (MAIN MENU) the normal TV mode after 20 seconds.) LANGUAGE Select desired control by pressing the... -
Page 11: Semi-Auto Tuning And Manual Tuning
Tuning of the Channels -/- - -/- - -/- - The VOLUME + button will move tuning toward Press the VOLUME (+) button to start the higher frequencies, and the VOLUME - but- channel tuning ton will move tuning toward the lower frequencies. Once desired channel is located, select “MEMORY”... -
Page 12: Channel Swapping
Tuning of the Channels Channel Swapping Skip Channel Set and Cancel Use this channel swapping feature to swap the When there is a position you do not use, Position channels between two stored programme position. 4 for example, by setting the SKIP Channel func- This feature is particularly useful after automatic tion it is possible to jump over this position, when tuning. -
Page 13: Setting Of The Private Position
Setting of the Private Position Private position is used to restrict of pro- To View a Programme on Private Position gramme positions that you do not want others Select private position (In this case position to watch. Any position can be set as the “15”). -
Page 14: Connecting Other Equipment
Connecting other Equipment Connecting to the Rear AV Input Jacks Connect the video and audio outputs of a VCR, video disc player, etc. to the input jacks of this TV set . Tapes and discs can be played back. Model CA14G1C, CP14SA1 , CP14SR1 , CP20SR1 CP21SA1... -
Page 15: Selecting The Colour System In Av Mode
Connecting other Equipment Selecting the Colour System in AV Mode Depending on the type of video tape or connected AV equipment being used, it may be necessary to select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable colour system. -
Page 16: Care And Cleaning
Care and Cleaning The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaning agents, solvents and polishes will cause permanent damage to the fine surface. 1. Unplug the power cord before cleaning the Television. 2. -
Page 17: Specifications
Specifications Power Source AC110-240 Volts, 50/60Hz Colour System PAL/PAL-60Hz/NTSC/NTSC4.43 Sound System B/G, I, D/KK’, M/M Channel Coverage VHF: E2-E12, R1-R12, K1-K9, J1-J12, A2-A13 // 0-11, 5A(AUS), 1-11(NZ) UHF: 21-69, A14-A69, J13-J62 // 28-69(AUS) CATV: S1-S41, X, Y, Z, Z+1, Z+2 Aerial input impedance 75 Ω... -
Page 18: Hints-Problems/Solutions
Helpful Hints - Problems/Solutions Before requesting service check the following chart. Problem: Check these Conditions / Try these solutions: Check if TV is plugged in. No picture, Try a different channel, if OK, probably station trouble. no sound Adjust Brightness or Contrast control. Poor picture, Adjust Fine Tuning. - Page 19 Memo...
- Page 20 Part No. 1AA6P1P4898-- C5SWC (AC6-A) SANYO ELECTRIC Co., Ltd.