Related Manuals for Zanussi ZTAE31ED1
Summary of Contents for Zanussi ZTAE31ED1
- Page 1 User Manual GETTING STARTED? EASY. ZTAE31ED1 ZTAE31EM1 EN User Manual Fridge Freezer...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. - Page 3 This appliance may be used in, offices, hotel guest rooms, bed • & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels. To avoid contamination of food respect the following •...
-
Page 4: Safety Instructions
SAFETY INSTRUCTIONS INSTALLATION • The mains cable must stay below the level of the mains plug. WARNING! Only a qualified person • Connect the mains plug to the mains socket must install this appliance. only at the end of the installation. Make sure that there is access to the mains plug after the •... -
Page 5: Installation
• This product contains a light source of energy • Please note that self-repair or non-professional efficiency class E. repair can have safety consequences and might • Concerning the lamp(s) inside this product and void the guarantee. spare part lamps sold separately: These lamps •... - Page 6 DIMENSIONS Overall dimensions ¹ Overall space required in use ³ 1751 1901 1233 ¹ the height, width and depth of the appliance ³ the height, width and depth of the appliance without the handle including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum Space required in use ²...
- Page 7 in a place with direct sunlight. Make sure that air WARNING! This appliance must be can circulate freely around the back of the cabinet. earthed. This appliance should be installed in a dry, well The manufacturer declines any liability ventilated indoor position. should these safety measures not be To ensure best performance, if the appliance is observed.
-
Page 8: Operation
WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely. LEVELLING When placing the appliance make sure that it stands level. This can be achieved by two adjustable feet at the bottom in front. -
Page 9: Hints And Tips
3. Lift the left side of the shelf and remove it. Store the fresh food evenly distributed on the glass To put the shelf back in: shelf in the freezer compartment. 1. Place the shelf flat on the door. The maximum amount of food that can be frozen 2. -
Page 10: Hints For Freezing
• Freezer: The colder the temperature setting, the temperature in the part of the freezer higher the energy consumption. compartment where there is no frozen food. • Fridge: Do not set too high temperature to save • Do not eat ice cubes, water ices or ice lollies energy unless it is required by the immediately after taking them out of the freezer. -
Page 11: Hints For Fresh Food Refrigeration
Type of food Shelf life (months) Dairy food: Butter 6 - 9 Soft cheese (e.g. mozzarella) 3 - 4 Hard cheese (e.g. parmesan, cheddar) Seafood: Fatty fish (e.g. salmon, mackerel) 2 - 3 Lean fish (e.g. cod, flounder) 4 - 6 Shrimps Shucked clams and mussels 3 - 4... -
Page 12: Care And Cleaning
CARE AND CLEANING 2. Regularly check the door seals and wipe them WARNING! Refer to Safety chapters. clean to ensure they are clean and free from debris. 3. Rinse and dry thoroughly. CLEANING THE INTERIOR DEFROSTING OF THE APPLIANCE Before using the appliance for the first time, the Frost is automatically eliminated from the interior and all internal accessories should be evaporator of the refrigerator compartment every... - Page 13 Problem Possible cause Solution Many food products were put Wait a few hours and then in at the same time. check the temperature again. The room temperature is too Refer to "Installation" chapter. high. Food products placed in the Allow food products to cool to appliance were too warm.
-
Page 14: Replacing The Lamp
Problem Possible cause Solution Water flows on the floor. The melting water outlet is not Attach the melting water outlet connected to the evaporative to the evaporative tray. tray above the compressor. The temperature in the appli- The temperature is not set cor- Set a higher/lower tempera- ance is too low/too high. -
Page 15: Technical Data
NOISES SSSRRR! BRRR! CLICK! HISSS! BLUBB! TECHNICAL DATA The technical information is situated in the rating related to the performance of the appliance. Keep plate on the internal side of the appliance and on the energy label for reference together with the the energy label. - Page 16 WWW.ZANUSSI.COM/SHOP...