Flute Voices (Organ Sounds); Creating Flute Voices - Yamaha Electone EL-900 Owner's Manual

3

Flute Voices (Organ Sounds)

The Flute Voice feature allows you to create your own organ voices, giving you access to an unlimited
combination of organ sounds. With this function, you can recreate all of the classic organ sounds by adjusting
the flute footage levels and the percussive sounds, just like on conventional organs.
There are eight flute footage settings, with three additional footage settings for the attack sound. You can
select various Preset Flute Voices, or create your own and save those to User Voices.
There are five pages: Menu, Footage, Attack, Volume, Save.
3
VOICE EFFECT
DISPLAY
FOOT REGIST.
SW. SHIFT
VOICE
EDIT PATTERN SEQUENCE
U. FLUTE L. FLUTE
VOICE VOICE
DISPLAY SELECT
NOTE:
Pressing the button again turns the Flute
Voice function off (the LED also turns off),
and changes the LCD to the Voice Display.
Each of the buttons acts as an on/off
switch.
NOTE:
The total volume of the all footages are set
on the VOL. page below.
40

1 Creating Flute Voices

A. B. C.
SET M. O. C.
EXP.
To create the Flute Voices:
PITCH/MIDI
1
RHYTHM
PROGRAM
TREMOLO
(FAST)
2
Press one of the Flute Voice buttons (UPPER or LOWER) in the
DISPLAY SELECT section.
The FOOTAGE page appears on the LCD and the LED above the
button lights.
FOOTAGE
Use the Data Control buttons directly under the flute footage numbers
to change each footage volume.
Play the keyboard and listen to the changes in the sound as you adjust
the footage volumes.