Yamaha Electone EL-900 Owner's Manual page 27

2
Press one of the Data Control buttons that corresponds to voice you
wish to select.
The selected voice will be shown at the upper row of the LCD. In this
case, Pop Organ 1 appears.
3
If you wish to, you can select voices from the other Upper Keyboard
Voice sections (Upper Voices 2, Lead Voice 1 and Lead Voice 2),
following steps #1 and #2 above.
4
Set the volume for each voice section. There are two volume controls:
Coarse and Fine.
Coarse: Use the VOLUME controls of each voice section on the panel
to set the desired level for each voice. The controls have seven volume
settings, from a minimum of 0, or no sound, to a maximum of full
volume.
STRINGS BRASS CLARI-
ORGAN PIANO GUITAR
Fine: Pressing the same panel voice button again (or the same Data
Control button corresponding to the selected voice) calls up the Voice
Condition display. Use the Data Control buttons to the far right side
to change the level of the desired voice. The relative level is indicated
by the bar under each voice in the display as well as by a numeric
value (from 0-24).
UPPER KEYBOARD VOICE 1
SAXO- CHORUS HARMO-
NET PHONE NICA
VIBRA- COSMIC TUTTI
PHONE
BRILLIANCE VOLUME
BRILLIANT MAX
1
2
MELLOW MIN
Pressing a voice button once calls up that
voiceﾕs Voice Menu display. Pressing it a
second time calls up the Voice Condition
display. Successive presses alternate
between the two displays.
NOTE:
2
27