Stereo-Pair Pans; Stereo Width - Yamaha 02R Owner's Manual

1. Press the [PAN] button.
PAN
2. Select a channel using
the [SEL] buttons or the
CURSOR buttons.
3. Press the [ENTER] button
to connect the odd and
even channels together.
Pan Positions
Including center, there are 33 pan positions
L16 L15 ...

Stereo-Pair Pans

Odd and even pairs of channels can be linked together in GANG mode
providing simultaneous pan adjustment. This function can be set by
pressing [ENTER] when one of a pair of channels is selected. The GANG is
indicated by a pair of dotted lines linking the top and bottom of the pan
control icons as shown in the following illustration:
To set the channels back to INDIVIDUAL mode, just press the [ENTER]
button again. The dotted lines between the pan control icons are deleted.

Stereo Width

In INDIVIDUAL mode, the width of a stereo signal can be set. When the
pan controls are set hard-left and hard-right, the stereo width is 100%. With
both pans set to center the stereo width is 0%. Setting the controls to a
position in between allows you to set the stereo width from 0% to 100%. To
maintain a central balance, however, you must set both controls to a
corresponding left and right values. For example, L5 and R5, or L10 and
R10.
MIXING Display Functions
:
L2 L1 C R1
Digital Recording Console 02R User's Guide
37
R2 ... R15 R16