Samsung MagicLAN SWL-2200P User Manual page 77

11mbps high rate 802.11b wireless lan mini
Table of Contents

Advertisement

The system tray wireless monitor is always red.
If you cannot connect to one of the clients in the
network.
The NT event log lists the error: "Server Service
terminated. Not enough Server Storage."
In Windows NT, there is no wireless monitor
icon in the taskbar or the Samsung Adapter
does not appear in the PC Card Control Panel
applet.
You cannot connect to some computers in the
Network Neighborhood.
Make sure that all the clients have the same
SSID.
Set all clients to the same wireless channel in
case of Ad-hoc network mode.
Make it sure that you are with in the range of an
Access Point (AP). If your PC can't be
associated
with
communicate with other clients.
Make it sure that all clients are up and are
running with a blue taskbar icon.
Make it sure that the client that you want to
communicate with is within the range of an
AP.
Make sure that your TCP/IP is set properly and
correctly.
Reinstall the Windows NT service pack.
Make sure the PC Card device is started as
Automatic in the device applet of the Control
Panel.
Double click on the PC Card icon in Control
Panel. Click on Samsung Adapter and then on
the properties button. It should say the driver
started correctly.
Make sure the drivers were installed correctly. If
all else fails, uninstall drivers and software
through Add/Remove Program, remove the
WLAN Card and reinstall the drivers
following the manual.
Make sure a resource is shared among all
computers connected to the same network.
Click on OK on the MS Networking login box
and OK on the following domain error.
If you cannot share a device in NT, you may
need to reinstall the NT service pack.
You may wait for several minutes for all of the
PCs to appear.
76
any
AP,
it
cannot

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magiclan swl-2200m

Table of Contents