Table of Contents
Advertisement
Please follow the following steps one by one to install the
< Method 1 - Inserting card first >
1. Ins ert the
MiniPCI/PCI Card
2. Power on your computer and allow Windows 2000 to load fully.
3. Found New Hardware Wizard appeared and the system looks for "Network
Controller". Press NEXT button and check if "Search for the best driver for your
device(recommended)" is slected and then press NEXT button. Insert the
MagicLAN Installation CD into the CD-ROM drive. You can ignore the MagicLAN
Utility's screen of the CD-ROM..
4. Mark the "CD-ROM Drive" tap and then press 'NEXT'. You can find the INF file and
now it is ready to install our software.
5. Press NEXT and system will copy driver files. Now driver files are fully installed to
start the Wireless LAN Card's operation.
into slot of your computer.
38
MiniPCI/PCI card
successfully.
Advertisement
Table of Contents
