Fujitsu ScanSnap iX1400 Basic Operation Manual page 158

HINT
To check the details about the certificate, press the [Certificate] button.
l To perform the authentication with a user ID and a password
Press the input field and enter a value for [User ID] and [Password] respectively, and
then press [OK].
l To perform the authentication with an external ID
Press the input field for [External ID], enter the external ID, and press [OK].
8. Press the [Complete] button in the [Check Connection Results] screen.
9. Press
3.
Click the [Network] icon in the notification area, at the far right of the taskbar
on the computer.
4.
In the window that appears, select the wireless access point which the
ScanSnap is connected to.
5.
When the window for entering a password appears, enter a password and
click [Connect].
a The connection method has been changed from a direct connection to an access point
connection. The computer and the ScanSnap are connected via Wi-Fi using the wireless
access point.
to display the home screen.
Changing the Wireless LAN Connection Method (iX1600 / iX1500)
158