Advertisement
4.2.
CHARGING THE LIGHT
4.2.1.
Push the light unit back from the front of the hat to remove (fig.2).
4.2.2.
Remove the USB cap (fig.3) and insert the plug into a USB socket.
4.2.3.
When the connection is made, a red light will show through the casing.
4.2.4.
When the light changes to green, charging is complete. Remove the light unit from the USB socket and return to the hat.
4.3.
WIRELESS HEADPHONE OPERATION (FIG.5)
4.3.1.
To turn the headphones on long press play.
4.3.2.
Scan for the headphones using your phones wireless settings.
4.3.3.
When the device is playing the indicator light will flash blue.
4.3.4.
When the device is paused the light will illuminate solid blue.
4.3.5.
To skip forward press the plus button once.
4.3.6.
To skip to the start of a track press the minus button once.
4.3.7.
To skip to the previous track press the minus button twice.
4.3.8.
To turn the volume up press the pause button and then press the plus button, press play again to check that the volume is at the
desired level.
4.3.9.
To turn the volume down press the pause button and then press the minus button, press play again to check that the volume is at
the desired level.
4.4.
CHARGING THE HEADPHONES
4.4.1.
To charge the device the headphones units can be removed from the hat (fig.4).
fig.4
4.4.2.
Using a mains adaptor or laptop charge the device. The indicator light will shine red while the device is charging (fig.5).
5. MAINTENANCE
5.1.
Remove the light unit, see section 4.2.1., and the speaker units 4.4.1 before washing the hat.
5.2.
Wash the hat at a low temperature and DO NOT tumble dry.
DO NOT use solvent or abrasive cleaners to clean the light unit.
8
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
1 press Start of track
2 presses skip to previous track
Volume Down
fig.5
01284 703534
sales@sealey.co.uk
Original Language Version
Indicator Light
Play/ Pause
Charge Port
www.sealey.co.uk
LED185W Issue 1 05/07/19
Skip Forward
Volume Up
Advertisement
