Table of Contents
Advertisement
Bluetooth one touch connection via NFC
About NFC technology
Near Field Communication (NFC) is a set of standards for
devices (smartphones/tablets) to establish radio communi-
cation with each other by touching/tapping them together or
bringing them into close proximity.
Bluetooth connectivity.
This audio system supports NFC-enabled device with
Android 4.1, Jelly Bean and higher.
For device with a lower Android version, refer the
operation manual of the device for recommended app
(application).
A Bluetooth audio
source device
(smartphone /
tablet).
NFC connection for audio playback
Check that:
Your device (smartphone / tablet) has an NFC function.
NFC function on your device is enabled.
Screen lock function of the device is off.
This unit is not in Eco mode.
1
Touch your device to N-Mark on the remote control.
2
A pop-up window asking whether to proceed with the
Bluetooth connection appears on the device. Select
<YES>.
The 'connected' message appears when the connec-
tion is complete.
3
Playback will start automatically. Otherwise, press play
(on remote control or source device).
Sound will be heard from the speakers of this unit via
audio streaming.
Your device must be within 32 feet from the unit.
Unlike other wireless technology, NFC requires no
discovery or pairing.
Simply tap the source device to the N-Mark on remote
control or main unit to instantly enjoy seamless con-
nectivity between your smart device and the audio
system.
NFC detection area
NFC detection area location may vary depending on the
device (smartphone / tablet). Refer operation manual of
the device for detail.
Bluetooth operation buttons
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
Notes:
To disconnect the Bluetooth connection, simply touch your
device to any of the N-Marks again.
This product switches to Bluetooth function automatically
when NFC tagging is done by your device.
If your device does not support NFC, or if you wish to listen
to audio via Bluetooth connectivity without NFC; refer "Pair-
ing with other Bluetooth source devices" on page 9.
Some Bluetooth devices will connect to this unit automati-
cally when the device or its Bluetooth mode was turned on.
In such case, it will also change the function selection of
this product. If you do not want it to connect automatically,
please disable Bluetooth on your device.
It takes about a few seconds for a Bluetooth enabled device
(eg. smartphone) to establish Bluetooth connection with this
unit via NFC or manual connection.
If "Empty tag" or similar message appears on your device,
touch the device again to the NFC detection area on the
main unit.
E-8
(during Bluetooth
standby mode)
Advertisement
Table of Contents
