Table of Contents
Advertisement
Note: If the camera cannot obtain an IP address from a DHCP server, it will use Zero Configuration
Networking (Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the
169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following methods:
Camera's web browser interface: http://<camera IP address>/
l
Network video management software application (for example, Avigilon Control Center (ACC)™
l
software).
ARP/Ping method. For more information, see
l
page 15.
Note:
Depending on the manufacture date of your camera, you will have one of the two options below to
log in for the first time:
Cameras manufactured after January 1, 2020: these cameras do not have a default username
l
or password and will be in a factory default state. You must create a user with administrator
privileges before the camera is operational. For more information, see
Username and Password on the previous
Cameras manufactured before January 1, 2020: login to the camera using the default
l
username of administrator with no password. It is recommended that you change the
password after your first login.
Accessing the Live Video Stream
Live video stream can be viewed using one of the following methods:
Web browser interface: http://<IP address>/
l
Network video management software application (for example, the Avigilon Control Center
l
software).
Aiming and Focusing the Camera
Use the Avigilon Control Center Client or camera web interface to aim and focus the camera. Consult the
software user guide for more information.
Accessing the Live Video Stream
Setting the IP Address Using the ARP/Ping Method on
page.
Initializing a Camera
9
Advertisement
Table of Contents
