Placing The Fwt - Huawei ETS2028 User Manual

Checking the Signal Strength
After installing the antenna, press and hold
1.
your FWT. Wait until the signal strength icon appears or you
can hear the dialing tone when you lift the handset.
If the signal strength icon does not appear after five minutes
2.
or you hear the failure tone when you lift the handset, it
indicates that the FWT is not receiving signals. In this case,
you need to adjust the direction of the antenna until you can
hear the dialing tone on lifting the handset.
If there is no signals even after you adjust the antenna in 360
3.
degrees angle, it indicates that the signal is weak in the
particular site. Either change the site or consult your service
provider.

Placing the FWT

You can place the FWT horizontally or vertically.
Horizontally
Place the FWT on a flat surface. Select a cool and ventilated
site for the FWT to dissipate the heat.
Vertically
Pull out the Handset retaining clip from the slot and turn it
1.
around. Then push it back so that the handset will not fall
down when FWT is placed vertically.
to power on
17