Clearances And Dimensions - Sharp SMD2489ES Installation Manual

CLEARANCES AND DIMENSIONS

• Dimensions that are shown in Figure 1 must be used. Given
dimensions provide minimum clearance. Locate electrical
outlet in the shaded area in the upper left-hand corner of the
cutout. See Figure 9.
• Contact surface must be solid and level. Pay special attention to
the floor on which the Microwave Drawer will sit. The floor of
the opening should be constructed of plywood strong enough
to support the weight of the oven (about 100 pounds).
• Check location where the Microwave Drawer will be installed
for proper electrical supply.
24" MICROWAVE DRAWER STANDARD MOUNT AND MEASUREMENTS
B
M
G
I
J
L
O
Figure 1
A. 6" (152.40 mm)
B. Suggested electrical
outlet location*
C. Anti-Tip block
D. 5" (127 mm)
E. 3 / " (88.90 mm)
1
2
F. 4" (101.60 mm)
G. 22 / " (561.98 mm)
1
8
opening
H. 14 / " (376.24 mm) to
13
16
bottom of Anti-Tip block
I. Allow / " (22.22 mm)
7
8
overlap
J. 23 / " (596.90 mm)
1
2
A
D
F
K
P
I
minimum depth
K. Allow / " (11.11 mm)
7
16
overlap
L. 36" (914.40 mm)
countertop height
M. Allow / " (11.11 mm)
7
16
minimum space
N. Floor must support
100 lb (45.4 kg)
O. 24" (609.60 mm)
cabinet minimum
P. 15 / " (395.29 mm)
9
16
opening
• Your oven can be built into a cabinet or wall as a stand-alone
unit. It can also be installed under gas or electric wall ovens, the
SuperSteam oven model SSC2489DS or under the cooktop models
SDH3042DB and SDH3652DB.
• Be sure that the clearance of the floor between the wall oven and
the microwave drawer is a minimum of 2-inches.
• The microwave interior will easily accommodate a 9" x 13" oblong
dish or a bag of microwave popcorn.
• The oven can also be mounted flush. Please see instructions for
flush mounting.
C
E
F
H
E
N
Figure 2
A. 21 / " (549.28 mm)
5
8
B. 4 / " (119.06 mm)
11
16
C. 1 / " (44.45 mm)
3
4
D. 21 / " (555.63 mm)
7
8
E. 23 / " (600.07 mm)
5
8
Figures 1 and 2 contain many Microwave Drawer measurements
for reference when planning the drawer's location.
Your oven can be built into a cabinet or wall as a stand-alone
unit. It can also be installed under gas or electric wall ovens,
the SuperSteam oven model SSC2489DS or under the cooktop
models SDH3042DB and SDH3652DB.
* Can also be installed using an electrical outlet in an adjacent cabinet
within the area where the provided electrical cord can reach. Power
cord access hole in cabinet should be a minimum 1
and deburred of all sharp edges.
IMPORTANT
electrical outlet to prevent tension.
2
B
C
B
J
C
D
E
F. 16" (406.4 mm)
G. 14 / " (370.68 mm)
19
32
H. 1 / " (38.89 mm) door thickness
17
32
I. 15" (381 mm) auto drawer opening
J. 4" (101.60 mm)
Always allow sufficient power cord length to the
A
A
G
I
D
H
F
1
/ " diameter hole
2
G