Table of Contents
Advertisement
FWT management program. The steps of installing the FWT management
program are as follows:
1.
Connect the FWT to a PC with a compatible USB cable.
2.
The system finds the new hardware and installs the modem driver
automatically.
3.
The installation program automatically starts, and then the
installation interface is displayed.
4.
Follow the instructions of the installation program.
5.
When the installation completes, a shortcut icon of the FWT
management program is displayed on the desktop and the FWT is
restarted.
Note：
The operating system configuration requirement of a PC: Windows
2000, Windows XP, Vista (32-bit or 64 bit).
Accessing the Internet
Before accessing the Internet, you need to set the network connection. If
you use the default settings, skip the following operations.
1.
Connect the FWT to a PC with a compatible USB data cable.
2.
Double-click the shortcut icon of the FWT management program.
3.
Click Connect.
4.
Click Settings to set the network connection.
Note：
You can consult your network operator for more information about
the network connection.
PC Fax
Before using the fax service, do the following steps:
1.
Install the modem driver on the PC.
2.
Install the PC facsimile software on the PC.
3.
Select Settings>Phone Settings>Data Service>Fax Mode.
Start the service.
Note：
8
Advertisement
Table of Contents
