Table of Contents
Advertisement
TPL65-A32/33
TPL69-A32/33
CAUTION
© Copyright 2016 ABB. All rights reserved.
Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
Disassembly and assembly
Removing cartridge group
Figure 1
Unplug cable connector (86515) and unscrew speed sensor (86505)
with O-ring (86506).
Unscrew the three screws (61059) and remove them together with the
Verbus Ripp® washers (61058).
Unscrew and remove two nuts (61037). Undo screw (61059) and re-
move together with Verbus Ripp® washer (61058).
Fasten separate lifting gear to each of the two ribs on the bearing cas-
ing provided for this purpose.
Press off cartridge group evenly using the press-off screws (90900) in
the holes provided.
If the blades have insufficient or no clearance between the rotor and the
casing, this can lead to damage to the blades and the casing.
Turn rotor to check that blades do not rub against turbine diffuser.
8
8.5
Page 94
Advertisement
Table of Contents
