Samsung QA55Q95TAUXTW E-Manual page 55

Enter the required settings for connecting the computer remotely.
2.
The image on your TV may differ from the image above depending on the model and geographical area.
1.
Enter the IP address of the PC you want to connect to.
• In case of Windows, when the computer to connect is within the same network (router/AP), run "cmd" command
in Settings Network and Internet
check the IPv4 address of the computer.
• In case of Mac, you can check the IP address in Settings
• When the TV and computer are not within the same network, it is required to know the public IP and configure
the router and AP. Check whether the router connected to the computer supports port forwarding. When the
company provides additional security features such as firewall, seek help from a security officer.
2.
Enter the Username of the computer.
How to check the Username: Control Panel
Groups in Mac.
3.
Select the Protocol for the computer's OS. (Windows: RDP, Mac: VNC)
4.
Enter the password for the login account.
For use of PIN, do not enter PIN but the specified password of the computer.
Connect to Remote PC
Make sure the PC is on and remote access is set to "Allow".
PC/Profile IP address or profile
Username
Enter a username.
Protocol
Password
Enter a password.
Remember my credentials (PC/Profile, Username, Protocol and Password)
Connect
View Network properties or in Start
Home
User Account Control in Windows, System Preferences
Manage User Profiles
RDP (for Windows users)
Cancel
Remote Access.
Office
- 55 -
Run, and then run "ipconfig" to
Users &