Do you have a question about the Washlet T1SW3014 and is the answer not in the manual?
Questions and answers
Tony
February 14, 2025
Just purchased the Washlet T1SW3014#01from Costco doesn't it have LED lit lid for night time if so how do I get light to eliminate bowl for night time use ?
Doug Caplan
February 20, 2025
The power light is flashing and the machine is not working/responding
1 comments:
Mr. Anderson
February 20, 2025
The power light on the Toto Washlet T1SW3014 is flashing because the main unit is not mounted properly. Additionally, the unit may not be working because it needs to be mounted correctly or the water needs to be resupplied. The flashing power light indicates that the unit is not functioning properly until these issues are resolved.
This answer is automatically generated
William Robertson
April 5, 2025
I need the correct bracket for my toto wash lit
1 comments:
Mr. Anderson
April 5, 2025
The correct bracket for the Toto Washlet T1SW3014 is not specified in the provided context.
Page 1
Phone : (770) 282-8686 WASHLET Warranty Registration and Inquiry For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300 when calling from outside of U.S.A.
The available functions vary according to the part no. Table of Contents Check your model's ....4 Safety Precautions part no. and write a ..11 Operational Precautions check mark in this fi eld as needed......12 Parts Names ......
Safety Precautions IMPORTANT SAFEGUARDS WARNING READ ALL INSTRUCTIONS BEFORE USING Do not use other water then allowed by the laws and ordinances of the Symbols and Meanings region of use. Only Use potable water. Do not use seawater or recycled water. WARNING May result in death or serious injury.
Page 4
Safety Precautions (Continued) WARNING CAUTION This is an electrical product. Do not install it anywhere water is likely to get on Do not use the product if the main unit is unstable. the product or anywhere with humidity high enough that water is likely to form ...
Page 5
Safety Precautions (Continued) CAUTION DANGER To reduce the risk of electrocution: 1. Do not use while bathing. If a water leak should occur, always close the shutoff valve. 2. Do not place or store the product where it can fall or be pulled into a tub or sink. When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, prevent damage to the pipes and hoses due to freezing.
Safety Precautions Operational Precautions (Continued) ■ For prevention of malfunctions ■ For prevention of damage Grounding Instructions ●Wipe plastic areas such as the main unit with a <About the seat switch> soft cloth tightly wrung out with water. ●When you sit on the toilet seat, the seat switch This product should be grounded.
Parts Names Main display Right side of the main unit Power LED Toilet lid cushions Seat LED Deodorizer outlet Energy saver Toilet lid Part no., etc. Water LED Main unit removal button Wand cover (Page 30) Deodorizing fi lter <All the LEDs illuminate in the fi gure> (Page 32) Seat switch (Built-in)
Preparation Using the Product for the First Time 1. Turn on the power 2. Open the shutoff valve Insert the power plug. Fully open the shutoff valve. The wand extends and then retracts. Check the "Power" LED illuminates. When the "Power" LED does not light, press for at least 3 seconds.
Basic Operation Mechanism of Auto Functions Using the Control Panel "Rear "Oscillating washing" As you approach As you sit As you stand up Washing washing" • When you press this button again during use, the wand • Washes your rear. "Front washing"...
Temperature Adjustment Toilet Seat, Warm Water, Drying Three different temperature levels (High, Medium, Low) and "OFF" setting can be selected. <The drawing is T1SW3014> Toilet seat temperature button (When you want to adjust the toilet seat temperature) Drying air temperature button When the seat temperature and the warm water When the seat temperature and the warm water (When you want to adjust the drying air temperature)
Energy Saver Features Type "Auto energy saver" or "Timer energy saver" can be selected. To save energy, lower (or turn "OFF") the seat or warm water temperature. You want to save energy only You want the product to save You want to save the maximum Energy saver is on for a preset duration of time.
Page 12
Energy Saver Features How to Set Auto energy saver button Auto energy saver Timer energy saver ●Set the Energy saver at the time you want to start it. Example: To save energy from 1 am to 7 am (for 6 hours) When the time of the day reaches Timer energy saver button <The drawing is T1SW3014>...
Various Operations Setting List How to Set Available Settings Setting Types Settings Applicable Models Bold: Initial settings Ref. Page • Set whether or not to spray mist in the bowl unit Pre-mist / OFF automatically Auto Cleaning T1SW3014 Page 26 functions Features •...
Various Operations Auto functions Cleaning Features Set whether or not to spray mist in the bowl Set whether or not to deodorize automatically unit automatically after sitting on the toilet seat Pre-mist Deodorizer Press (for about 10 seconds) until all control panel LEDs fl...
Maintenance Power Plug Main Unit WARNING Power Plug Main Unit (Approximately once a month) (Approximately daily) Always unplug the power plug from the outlet before maintenance or inspection. (Failure to do so may cause electric shock or malfunction, resulting in a breakdown.) Soft cloth •...
Maintenance Gap between the Main Unit and Bowl Unit Gap between the Main Unit and the Toilet Lid Gap between the Main Unit and Bowl Unit Gap between the Main Unit and the Toilet Lid (Approximately once a month) (Approximately once a month) The toilet lid can be removed for You can remove the main unit to clean the top of the bowl unit and the bottom of the main unit.
Maintenance Deodorizing Filter Wand Water Filter Drain Valve Water Filter Drain Valve Deodorizing Filter (Approximately once every 6 months) (Approximately once a month) <If you think the water pressure has weakened> Unplug the power plug. Close the shutoff valve. • The water supply stops. Remove the deodorizing Deodorizing Filter CAUTION...
What to Do? Freeze Damage Prevention If the water does not fl ow due to a water service interruption When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing. Attention! If the water does not fl...
If the problem persists, consult the installer, seller, or (Failure to do so may cause breakdown or skin irritation due to polluted product tank water.) TOTO customer service. If a water leak occurs, close (see contact information on the back cover.) the shutoff valve.
Troubleshooting Rear washing, Front washing and Wand Warm air drying Ref. Ref. Trouble Please check Trouble Please check Page Page ● Has the toilet been sat "on" and used continuously for 2 hours or longer? (If The dryer ● Is the dryer temperature set to low level? so, operation is stopped for safety purposes.) temperature is low ➞Stand up from the seat and then use again.
➞If the water leak does not stop, close the shutoff valve and consult with (Auto energy saver : about 79 °F (about 26 °C)) plumbing connections Heated TOTO customer service. (see contact information on the back cover.) seat Heater capacity 50 W ●...
Page 22
Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO or which the product is not specified to tolerate, including failure to use the factory equipped cord and plug or use of a loose or faulty electrical outlet or use of a current or socket other than a 120V, 60Hz electrical current from a GFI (ground, fused) socket.
Need help?
Do you have a question about the Washlet T1SW3014 and is the answer not in the manual?
Questions and answers
Just purchased the Washlet T1SW3014#01from Costco doesn't it have LED lit lid for night time if so how do I get light to eliminate bowl for night time use ?
The power light is flashing and the machine is not working/responding
The power light on the Toto Washlet T1SW3014 is flashing because the main unit is not mounted properly. Additionally, the unit may not be working because it needs to be mounted correctly or the water needs to be resupplied. The flashing power light indicates that the unit is not functioning properly until these issues are resolved.
This answer is automatically generated
I need the correct bracket for my toto wash lit
The correct bracket for the Toto Washlet T1SW3014 is not specified in the provided context.
This answer is automatically generated