Chapter 36: Replacing The Palm-Rest Assembly; Procedure; Post-Requisites - Dell Inspiron 13 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
Place the palm rest face down on a clean and flat surface.
Post-requisites
1. Replace the keyboard.
2. Replace the touchpad.
3. Replace the status-light
4. Replace the system board.
5. Replace the fan.
6. Replace the heat sink.
7. Replace the solid-state drive.
8. Replace the power button with fingerprint
9. Replace the I/O board.
10. Replace the display assembly.
11. Replace the wireless card.
12. Replace the coin-cell battery.
Replacing the palm-rest assembly
computer. After working inside your computer, follow the instructions in
board.
reader. (if installed)
Replacing the palm-rest assembly
36
After
www.dell.com/
65