1. Manuals
  2. Brands
  3. Kodicom Manuals
  4. DVR
  5. DigiNet Center
  6. User manual

Kodicom DigiNet Center User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KODICOM
KODICOM
DigiNet Center(v4.11)
User Guide
DigiNet
DigiNet

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DigiNet Center and is the answer not in the manual?

Questions and answers

Related Manuals for Kodicom DigiNet Center

Summary of Contents for Kodicom DigiNet Center

  • Page 1 KODICOM KODICOM DigiNet Center(v4.11) User Guide DigiNet DigiNet...
  • Page 2 Center Program? Center Program? It’s a program that enables you watch and control the site DVR. Therefore, you don’t need a DVR to watch site DVR’s image. System spec.(recommended) System spec.(recommended) ►CPU : Celeron 433MHz over ►MEMORY : 64MB over ►VGA CARD : AGP 16MB over ►HDD : 100MB over ►O/S : Windows98 SE / Windows ME / Windows 2000 / Windows NT...
  • Page 3 Contents When you purchased DigiNet Center program, make sure that the following contents are Included. DigiNet Center Program User manual...

  • Page 4: Table Of Contents

    Contents Contents DigiNet Center User Manual 1. CONNECTION……………………...………………………………………..7 1.1 ISDN, DSU CONNECTION..…………………………………………..7 1.2 MODEM, LAN CONNECTION……………………………...………….8 2. Center program installation…………...….………………………………9 3. Center program execute…………….…………………………..……….12 4. Main screen setup………………………………………………………...13 5. Center setup…………………….………………………………...……….14 6. How to connect to Site DVR……….……………………………………18 6.1 Connection on LAN………………………...………………………..…19 6.2 Connection on PSTN,ISDN……………………………………………21...
  • Page 5 Contents Contents DigiNet Center User Manual 13. K-Remote Backup Server ..............74 13.1 Change Password......…………………………………75 13.2 Backup log......………………………………………….75 14. Intelli Upgrader ……………………………………… ………………….77 14.1 Intelli Upgrader ………………………………… …………………….77 14.2 Remoteness upgrade …...……………………… …………………...78 15. Health Monitor ……………………………………………………………80 15.1Performing Health Monitor ……………………………………………80 16.
  • Page 6 1. DigiNet Center Manual 1. How to connect Communication line…........…7 1.1 Connect ISDN, DSU, exclusive line..……………………………7 1.2 MODEM, LAN connection..…………………………………………8 2. How to install Center program………………..…………………9 3. Execute Center Program…………………..………………………12 4. Main Screen setup…………………..………………………………13 5. Center Communication setup…………………..………………14 6. How to connect SITE ……………………………….…………………18 6.1 LAN connection......…………………………………….19...

  • Page 7: Connection

    1. Connection 1.1 LAN, ISDN(using Router), connecting exclusive line. (connecting with UTP terminal of LAN card) CENTER PC Router Internet network & Local Intranet network ISDN T.A (exclusive modem) (connecting with UTP terminal of LAN card) exclusive line ISDN T.A Router...

  • Page 8: Modem, Lan Connection

    1.2 Connecting PSTN, ISDN modem Connecting with COM 2 terminal ( 9 PIN ) MODEM ISDN TA (25 PIN) PSTN (regular phone line) ISDN line MODEM CENTER PC ISDN T.A.

  • Page 9: Center Program Installation

    2. Center Program Installation Insert Center program CD into CD-ROM and click the folder that has center program. Then double-click on folder <disk1>. Execute a file called <setup>...
  • Page 10 Click <Next> Check on ‘I agree to the License Agreement’ and click <Next> Select the path where you want to install DigiNet Center program and click <Next>...
  • Page 11 Installation will start. Click <Next> DigiNet Center icon will be created in the background as below. Double-click DigiNet icon and run Center program.

  • Page 12: Center Program Execute

    3. Center program execute Execute center program by double-double clicking DigiNet icon on desktop. DigiNet check the password when it starts. (It doesn’t have a password as a default.) Password setup window [Caution] • It is impossible to change your password if you forget it. (Please write it down in another place.) •...

  • Page 13: Main Screen Setup

    4. Main screen setup First screen Displays current date and time. [Now] Button for bringing current image while connected to site. [Search] Button for changing into mode for finding data and site data. [Setup] Button for setting up site while connecting to center program or site. [Connect] Connection button for accessing the site.

  • Page 14: Center Setup

    5.Center setup How to setup How to setup [Setup] Configurate system environment Click this button. Center setup will be displayed. [OK] Pressing <OK> brings you to the initial screen.
  • Page 15 Setup Configuration Setup Configuration [Store searched image] [Modem connection time] When you search for recorded image after Center system disconnect the connection connecting to the site, this function will after the selected time if there is no simultaneously store the image to a designated response.
  • Page 16 Communication Communication Environment Environment [Select line type] • Select communication line type you wish to use. Select ‘PSTN/ISDN (NO ROUTER) when using regular phone line or ISDN (Without Router). • Select ‘LAN/ISDN(ROUTER)/LEASED CIRCUIT (ROUTER) when using LAN or ISDN/ISDN only line (With ROUTER).
  • Page 17 Etc. Etc. [Change password] • This is used to change password. (There is no password in the factory setup.) • Enter password and click <ok> • Enter new password and click <ok> [Clock Display Format] • This is a format for displaying current date and time.

  • Page 18: How To Connect To Site Dvr

    6. How to connect to Site DVR [Connect] You can connect to site DVR with this. Click this on the initial screen.

  • Page 19: Connection On Lan

    6.1 LAN environment connection Once a user clicks the button, the following connection setting window is displayed. [Connection list] : In order to connect to a site, a user should enter groups, site codes, IP addresses, installation sites and passwords and put them on the connection list after selecting [Add].
  • Page 20 [Edit] On editing information of the site, a user saves A user chooses sites of which information is to be the edited site information just by selecting edited and then selects the button, [Edit]. the button, [OK]. [Connect] The window displays a progress status of On choosing the site to be connected, a user selects connection to the site.

  • Page 21: Connection On Pstn,Isdn

    6.2 PSTN and ISDN environment connection A user selects ‘PSTN/ISDN(NO ROUTER)’ as a line type in the tab of “communication environment” on [Settings] window. Once a user clicks the button, a following connection setting window is displayed. [Connection list] : In order to connect to a site, a user should enter groups, site codes, phone numbers, installation sites and passwords and put them on the connection list after selecting [Add].
  • Page 22 [Edit] On editing information of the site, a user saves A user chooses sites of which information is to be the edited site information just by selecting edited and then selects the button, [Edit]. the button, [OK]. [Connect] On choosing the site to be connected, a user selects The window displays a progress status of the button, [Connect].
  • Page 23 If it gets connected, below screen will be displayed.

  • Page 24: Playing Current Image

    7. Playing current image How to setup How to setup Camera(select the camera) • Select the camera to view • Uninstalled cameras don’t be displayed on screen. [Now](current image) Click this button. • This button plays the current image. [Tip] ☞...

  • Page 25: Change To Search Mode

    8. Change to search mode How to setup How to setup [Search mode] • Select this button if you want to switch to search screen. • In order to switch the current image to search screen, press and stop the Image transmission to switch to search screen.

  • Page 26: Date And Time Select For Searching

    8.1 Select Date and time for searching [Select date and time] Year, month, day, hour, minute will be displayed for the ones you want to search. Month, year to search Date to search Hour and minute to search...

  • Page 27: Camera Selection

    8.2`Camera selection 8.2`Camera selection [Search Bar] [Scroll button for camera] • This indicates time line for presently searching • This function is to scroll search cameras. data. • Move the bar to the left and right to search the stored data. [Camera] •...

  • Page 28: Replaying Searched Image

    8.3 Search screen play [Playback search screen] [Indication for renewal] This function is to renew a graph indication • You must fix number of camera with date and time before running. while searching the recorded data. You can playback with SKIP and DELAY. •...
  • Page 29 4 [Skip] • Searched output of image will be ignored as much as designated output number. It will then give the output to a monitor. • Designated number is not the number for the images but it is an internal value for DigiNet program.
  • Page 30 [Summer Time] • In case summer time is applied, the time indicator on search screen changes from yellow to pink, and when summer time is deactivated it returns to yellow. • Time error problem does not occur which is due to Summertime . [When Summer Time is not applied] [When Summer Time is applied]...

  • Page 31: Book Mark

    8.4`Book mark 8.4`Book mark [Bookmark] [Delete] This function is to register the location of • This function deletes the image location that is currently searched image. Registered image registered to the Bookmark. from the bookmark is possible to be moved at once.

  • Page 32: Search Screen Zooming In/Out And Moving

    8.5`Search screen zooming in/out and moving 8.5`Search screen zooming in/out and moving [Zoom] This function is to zoom in and out the stored image and it can zoom in the image in a five ☞ [Tips] phrase. • Basically zooming a small image gets a [Digital Zoom] little bit distorted image.

  • Page 33: Search Screen Quality Improvement

    8.6`Search screen quality improvement 8.6`Search screen quality improvement [Gamma correction] [Image Improvement] This function is used when a value between [Brightness] brightness and contrast need to be adjusted. This is to adjust brightness of stored This is especially used when the color of stored image image looks unusual.

  • Page 34: Audio Play

    8.7. Audio play [Audio Play Configuration] • When you click the ‘Audio Play’ icon. The audio play configuration window like left appears. Select your settings for audio play back. • Plays image with the recoded voice. • Check on “Enable” on ‘Audio Play’ item. •...

  • Page 35: Data Backup

    8.8 Data Backup [Back up] When you click on this button on the left, following backup window will appear...
  • Page 36 Backup onto Floppy Disk Backup onto Floppy Disk [Backup floppy disk] • While you are searching for recorded data, select the image to backup and click this icon. Then “Data Backup” window will appear. • If you click on the Backup button while one image is zoomed in, you will be able to select the floppy disk drive and other drives such as HDD, CD-RW, the movable drive, and the network drive.
  • Page 37 Using watermark checking program Using watermark checking program Run the watermark check program by running the file ‘WMChecker.exe’ on the floppy disk. The following image will appear. [WaterMark check] • Execute “WMChecker.exe” that has been copied to the drive with the backup image. Then, the watermark program will appear as shown above.
  • Page 38 • Once opened the name of the file will appear in the window. Select Watermark check to verify the image. Once verification has been completed windows similar to those below will appear. • Corrupted image Uncorrupted image...
  • Page 39 How to backup large media How to backup large media ☞ [Tips] To format a CD, Direct CD and InCD programs shall exist on Windows. To use the CD Format button, select CD drive from the backup media selection window. [Format CDR/CDRW] [Setup time for backup] •...
  • Page 40 Backup onto CD-R/CD-RW Backup onto CD-R/CD-RW [CD-R/RW backup] • Select [Select media] from “backup media” window. • Select back up media drive with CD-RW on ‘Select Media’ then press [Ok] button For back up with using CD-R/CD-RW on DigiNet Program, you need to format the CD with [Format CDR/CDRW] button in prior.
  • Page 41 AVI video backup AVI video backup ☞ ☞ [Tips] To format a CD, Direct CD program and InCD program shall exist on Windows. (When formatting a CD using InCD program, only CD-RW media is supported.) [AVI video backup] [Camera selection] •...
  • Page 42 Viewing AVI video backup files Viewing AVI video backup files [Select an AVI video backup file] In order to check a file backed up into AVI video image, once a user doubleclicks the file, “KDB\BACKUP_AVI\ {xxxxxxxx-xxxx-xxxx-xxxx- xxxxxxxxxxxx}\MMDDYY- HHMMSS~MMDDYY-HHMMSS[the number of the camera].avi in a specific directory, he can check contents of the related file using separate video players or a basic media player...
  • Page 43 ☞ [Tips] • When other advanced compression codecs then the basic Mpeg compression codec provided on Window were installed, AVI files are saved into smaller sizes, the compression quality is advanced and the time for backup is reduced. • According to types of compression codecs, number of selected cameras and set backup time, AVI backup time may differ significantly.(When the basic codec provided on Window is used, codecs of Mpeg4 Video Codec v2 over are recommended.) •...

  • Page 44: Printing Searched Image

    8.9 Printing searched image [Print] Print the selected image. Printing is possible when you select [Print] button only with one magnified screen (Print after adjusting size and brightness.) If the printer is not installed, following error message appears.
  • Page 45 [Tips] ☞ Installing printer 1. Click on Start Setup Printer from background. 2. In Printers window, select and click Add Printer. 3. In Add Printer window, click Next. 4. Click the manufacturer and model of your printer. 5. Click available port. 6.

  • Page 46: Selection Between Pan/Tilt & Surveillance Mode

    9. Selection between PAN/TILT & surveillance mode How to setup How to setup Left double click will magnify the screen and right click on the channel bring you to PAN/TILT mode (Only when PAN/TILT camera is used) To switch to display mode click this button.

  • Page 47: Control Of Pan/Tilt Mode

    9.1 How to Control PAN/TILT Mode [ZOOM] Display current date and time • controls ZOOM [POWER] [DIS] • camera power • This is used to go back to surveillance mode [WIPER] from PAN/TILT mode. • camera wiper [Go-To] [LIGHT] Dome camera moves to the configured position on •...

  • Page 48: Site Dvr Setup

    10. Site DVR setup How to setup How to setup [Setup] Click this button Type your password and click [Ok]. [Close] Select [Close] to end Setup...

  • Page 49: Hardware Setup

    10.1 Hardware setup Camera setup Camera setup [Setup] [Recording with Motion Detected channel] • Check on the camera you want to use. • When a camera detects any movement, system records it’s linked channel as well. • From “Recording Schedule” tap, record setting must be [Name] under Motion Detection mode for inputted specific camera •...
  • Page 50 External sensor setup External sensor setup [Setup] [Choosing Beep Sound] • Check on the box. The number of installed • Beep sound will occur when a signal is detected within selected time. Speaker that is located inside sensor and input connector should be same. the system will let you know site’s situation by the sound.
  • Page 51 Control Setup Control Setup [Use] [Linked Sensor] • Check the output no. to use • If you want the controller to work automatically, enter the sensor to connect to it. [Controller name] Ex) When operating sensor number 2 while sensor •...
  • Page 52 External Monitor External Monitor External monitor is used with home TV or normal analog monitor to receive and produce image output from DVR [Sequence Time] • Set the sequence dwell time to move to next screen in sec. [Camera 1~16] •...

  • Page 53: Motion Detection Setup

    10.2 Motion Detection Setup This function enables you to record any activity without the need for external sensor. [Camera] [Beep Sound Occurrence] • Click the camera you want to set up • When a motion is captured from related camera within selected time, speaker from inside the system will make [Detection Area] BEEP sound to let you know the situation by selecting...
  • Page 54 For all the camera [Erase selected area (Full)] [Compression resolution] • Erase all the selected motion area on for all • Choose screen quality you wish to record. cameras. • Screen quality improves as you set to higher value but file size per screen frame will increase. •...
  • Page 55 [Zooming out when motion was detected] Full Screen [Detection area color setting] • When motion is detected, the screen will go from • It decides the color of motion detection current to full size. area in the display mode. • Enter camera number. Ex) For setting camera no.1, no.2, no.3, [Screen rotation by 4 channels (second).] input “1,2,3”.

  • Page 56: Recording Schedule Setup

    10.3 Schedule Setup [Record mode] [Camera] • This function is to set recording type along with day and • Select camera number. time for selected camera. • After choosing day and time from selected camera, [Setting recording type] selecting more than 1 record mode will change selected time setup within selected time.
  • Page 57 [Tips] ☞ Continuous Record • This is used when continuous recording is done without motion detection. Motion Detection Record • This function records only when it captures any movement. Sensor Record • This function is to record by inputted sensor’s signal. •...
  • Page 58 [Copy] • This is an application to copy and transfer setup information from currently selected camera. • A pop up menu will appear on the right hand side when you click [Copy]. Currently selected camera will copy to camera you chose from the pop up list. [Holiday selection] •...
  • Page 59 Holiday Setup Holiday Setup [Calendar] • Select any day you want to designate as holiday. • << : Move to last month. • >>: Move to next month. • Today : Shows current Month/Day/Year. [Rotate] • You may choose specific Month/Day/Year as holiday. •...

  • Page 60: Site Information

    10.4 Site Info [Site Information] • Enter site code, place, version, installation guide & date and Warranty date. Etc. (you must enter site code.) [Tip] ☞ When you try to connect to site from center, system checks site code and password together. And if they are not identical , the connection will be disclosed.

  • Page 61: System Setup

    10.5 System Setup [Water Mark] [Automatic system off] [Using Watermark ] • Assign the time to turn off by checking the desired date and time • You can put Watermark authentication onto the image. If you check on the box you can use Watermark function.
  • Page 62 [Live Video stream bandwidth] Set the bit-rate control per second of the image • transmitted to the network. What is watermark? ☞ [Tips] • BMP or JPG image could always be controlled/fixed by the user. So, in order to avoid falsification such video images you must insert ‘watermark’, which is a coded data to check if the data has been changed.
  • Page 63 Setup backup schedule Setup backup schedule [Title of back up setting] •This function shows a reserved list of Date/Time, Rotation, and backup media in backup data. • It consecutively progress backup according to setup time of the backup schedule. [Add] •...
  • Page 64 Add Backup Schedule Add Backup Schedule [Media List] • Choose backup data to record it to backup media. • Media list can hold up to 8 lists, when you fail to record it to an initial media, backup will start automatically to the next media.
  • Page 65 Selecting Backup Media Selecting Backup Media [Local Drive] • You may choose HDD or removable drive (MOD, DVD-RAM, ZIP, USB HDD etc), CD-RW, Network drive. • Among the systems that are physically and logically installed, all of write-recordable media is supported.

  • Page 66: Other

    10.6 Miscellaneous [Screen Divide Mode] • Remotely changes from site to divided image which is currently being taken by camera. (1,4,6,9,10,13,16 split screen, full screen magnification and possible to convert to 4 screen). [Restart Site] • Could remotely activate DVR system of site from center.

  • Page 67: Searching Backup Data

    11. Searching Backup Data Setup Setup [Search] • If you want to search for backup data, then insert the backup diskette without the connection and press this button. [Tip] ☞ Following are the ones that can support data for backup. HDD, removable drive (DVD-RAM, ZIP, MOD etc) and CD-RW, and Network drive that can be recognized from...
  • Page 68 [Site Now Screen] [Site Code List] • When displaying current image after connecting to • Backup data’s Site Code and its key value will be site, this will search the stored data from Center again. displayed. • It is possible to distinguish by Site Code when backup data is stored from many sites in backup medium.

  • Page 69: Search Mode Conversion

    11.1. Search mode conversion Setup Setup [Search] • To convert to the search mode, select button. Define the data type and the backup driver form the [Search Mode Select]window, and click on the [Confirm] button. [Exit Search] • To go to the main screen, click on button.

  • Page 70: Search Date And Time Selection

    11.2 Search Date and time selection [Select date and time] Year, month, day, hour, minute will be displayed for the ones you want to search. Month, year to search Date to search Hour and minute to search...

  • Page 71: Search Screen Play

    11.3 Search screen play [Camera] • Select the camera number you want to search. • Selected camera number will be indicated by darker color as shown below. [Playback searched image] • You can adjust searching speed by Skip and Delay. Forward playback Playing one picture backward Playing one picture forward...

  • Page 72: Search Screen Zooming In And Brightness Adjustment

    11.4 Search screen zooming in and brightness adjustment ☞ [Tips] • Basically zooming a small image gets a little bit distorted image. But DigiNet System has developed own compression engine code (K-Engine CODEC) to minimize this problem. •Zooming in and out is applicable to only one camera. Multiple image zooming is not possible so stop playing multiple images but just select one channel to zoom.

  • Page 73: Way Audio

    12. 2Way Audio Connect 2Way Audio Connect 2Way Audio [Connecting 2Way Audio] Both direction’s voice conversation is possible when you connect form the Center to Site. Select this button to connect 2Way Audio after connecting to site. • If you choose 2Way Audio while transmitting current image, it might temporally delay image transmission to initialize sound card but this is not a fault.

  • Page 74: K-Remote Backup Server

    13. K-Remote Backup Server - Using remote drive backup function from the site, this function receives data while backup is in process, and executes automatically when center program is executed. [Menu] [Change Password] • When doing a remote drive backup from the site, you may change the password.

  • Page 75: Change Password

    13.1 Change Password [Change Password] • In order to backup a data to a remote drive from site, you can select remote drive after typing IP address and password of where Remote Backup Server program is installed, and this function lets you change that inputted password.
  • Page 76 View log View log [Client Information] • This shows remoteness backup data’s IP address and Site Code from the site. [Backup Information] • When you setup the remoteness backup, this shows the title for inputted backup data. [Backup Start time] •...

  • Page 77: Intelli Upgrader

    14. Intelli Upgrader -Using IP address that is registered in connection list of center program, this function can upgrade DigiNet program to a new version that is remotely executing to a Site. Execute Intelli Upgrader program that was basically provided when installing center program from desktop window.

  • Page 78: Remoteness Upgrade

    14.2 Remote Upgrade [Site Information] Select the site you want to upgrade for program.. [Package select] Select [Ok] after selecting new version package folder that is stored in Hard disk or its network folder. In the designated folder, the package folder (Data1, Data2, Data3, Data4, Data-a, Data-b, Data-c, Data-d, Data-e, etc.) or all files of the package folder shall be included.
  • Page 79 Upgrade will start after selected update package program is transmitted to site when you select [Start update]. [Program transmission and status of upgrading process] When you select [OK] button after upgrade is completed, system will restart automatically and DigiNet program will execute again. [Completed program transmission and upgrade]...

  • Page 80: Health Monitor

    15. Health Monitor - Health Monitor is a program that makes real-time remote monitoring of availability of connection to a site, cameras, control and record status possible. Run Health Monitor program on the desktop screen which appears when center program is set. 15.1 Health Monitor [Toolbar] [Menu]...
  • Page 81 [Status display window] • This window shows whether or not cameras, controllers and record status are normal. • According to functions of Tab menu, it may change to a window where a memo book or a system log file can be searched. [Tab menu] •...
  • Page 82 Toolbar Toolbar [Auto Check] [Connect] It selectively executes auto check of For the purpose of remote checking of connection statuses of cameras, control cameras of sites or controls and record statuses and data storage statuses in the status, a user should connect to sites, select registered sites, so that it is very useful when sites to be connected and then choose [Connect].
  • Page 83 Auto Check Auto Check [Select connection list] [Remove] • A user can select sites to be remotely auto- • It deletes connection information of sites registered in the check list. checked in the registered site information. • Once a user selects a group name such as [Remote Site], auto remote check is available to [Remove All] all sites registered in the group.
  • Page 84 Auto Check – Begin Check Auto Check – Begin Check [Site info] • It shows site codes and locations of currently connected sites. [Process info] • It shows information on connection statuses of currently connected sites and process status of auto check.
  • Page 85 Setup Setup [Clock Display Format] • A user selects clock display format of record time displayed during connection to a site in order to check cameras, controls and record statuses. [Starting up with center] • A user can set up Health Monitor program in a way that it automatically starts up with Center program.
  • Page 86 Tab menu – Current State Tab menu – Current State [Camera status] • It displays numbers and image output statuses of installed cameras in currently connected sites. • Icons according to camera statuses are as follows. [Icon of a camera under normal status] [Icon of an installed camera whose image input is not available yet] [Icon of an uninstalled camera] [Control status]...
  • Page 87 Tab menu – Memo Tab menu – Memo [Memo list] • It displays record times and titles of memos recorded in a currently connected site. [Write] A user enter contents of a memo, and once he enters a title and contents of a memo and selects the button, [OK], entered contents are recorded into a related site.
  • Page 88 Tab menu – System Log Tab menu – System Log [system log list] • It displays record times and types of system logs recorded in a currently connected site. • Contents by types recorded in system log are start and end of site system, connection and disconnection of Center program, and run and termination of setup window.

  • Page 89: Emergency Monitor

    16. Emergency Monitor - Emergency Monitor program provides the real time data receiving function for a message which is urgently transferred by means of “Motion for Emergency message” and the direct connecting function to a site where emergency occurs by means of Center program. Run Emergency Monitor program on the desktop screen which appears when center program is...
  • Page 90 Toolbar Toolbar [Exit] [Center] It terminates Emergency Monitor It directly runs Center program without program. terminating Emergency Monitor program. According to setting, the program may be Once a user selects an emergency message changed into an icon in system tray. displayed on an emergency message display window and then selects [Center], Center [Hide ]...
  • Page 91 Setup Setup [Auto run with windows startup] • A user can set emergency Monitor program so that it automatically begins to run during Windows startup. [Exit button action to window hide] • When a user selects [Exit], Emergency Monitor is not completely terminated but emergency window is minimized like the way to hide it by iconizing it.

  • Page 92: Webdvr Manual

    2. WebDVR Manual 1. WebDVR Connection ………………...……………………………………93 2. WebDVR Function Description ……………………………..……………95...

  • Page 93: Webdvr Connection

    1. WebDVR Connection [Homepage access] Enter the IP address of the site to access in the address field. Enter the site code and the password, and click on the Log In button. DirectX is to maximize the speed by displaying images on the overlay through DirectDraw.
  • Page 94 [Security warning] When accessing the WebDVR program for the first time, a security warning message will appear as shown below. Select “Yes”. On the background, HWSetup file will b created as follows: ☞ [Tip] If HWSetup file was not created on the background, the user cannot use the WebDVR function.

  • Page 95: Webdvr Function Description

    2. WebDVR Function Description If you click an image displayed, the border will turn blue. (To zoom in one image, double-click the corresponding image or click on One Partition Mode.) By clicking on the Stop button, the user can stop image transmission.

  • Page 96: Chapter 3 Appendix

    Chapter 3 Appendix 1. PSTN/ISDN(in case of not using Router) setting up PPP …- 97 2. Manual setup of ISDN without Router ……………………………99 3. CD formatting and backup using Direct CD S/W…………………101 4. CD formatting using InCD S/W………………………………………105 5. System setting for using 2Way Audio function…………………108...

  • Page 97: Pstn/Isdn(In Case Of Not Using Router) Setting Up Ppp

    PPP setup for PSTN/ISDN without router PPP setup for PSTN/ISDN without router PSTN, ISDN setup on Windows98 • Install a modem for PSTN connection, or ISDN Terminal Adapter for ISDN. • Execute KPPPSetup.exe. • You need to reboot the system when the PPP setup is done.
  • Page 98 • On DigiNet communication setup of site software select ‘LAN’. On center software select ‘PSTN/ISDN(NO ROUTER). • KPPPSetup.exe should be installed on both DigiNet center and site. • Please check after installation if the connection works well between center and site. ☞...

  • Page 99: Manual Setup Of Isdn Without Router

    Manual ISDN Setup without router Manual ISDN Setup without router [When there are a few dial-up servers depending on the ISDN modem] • Basically ISDN setup will be done automatically if you run KPPPSetup.exe. However, there might be cases that you need to setup manually when there are a few dial-up servers depending on the ISDN modem.
  • Page 100 Enter to change password and input ‘1234’ for all three blanks. • Choose “PPP: Internet, Windows NT server, Windows 98” on ‘Server Type’. • Check “Enable Software Compression” and “Require Encrypted Password” and click “Apply” button and “OK” . Make sure if there is “Monitoring” in the •...

  • Page 101: Cd Formatting And Backup Using Direct Cd S/W

    CD Formatting and Backup Using Direct CD S/W CD Formatting and Backup Using Direct CD S/W [CD Formatting Using Direct CD S/W] • When backing up data in an unformatted CD or receiving an error message after attempting to back up data, format the CD by the following procedure: ☞...
  • Page 102 Enter the name for CD-R/RW in “Label” field of “~ Drive Format” window. Then, click on [Start Format] button. “CD Formatting..” window will appear and CD-R/RW media will start to be formatted. After formatting, “CD Ready” window will appear as below. Then, click on the [Confirm] button.
  • Page 103 When Direct CD Format Utility window appears again, click on button on the top- right of the screen. (Be careful not to click on the [Eject] button.) Select the backup type, the backup time, and the backup camera, and click on the [Confirm] button to start backup.
  • Page 104 When “Direct CD Eject Option” window appears, select “Close to be read by all computers” field and click on the [Confirm] button. (Select “Protect CD not to overwrite” field to prevent re-writing on CD-R/RW media where current backup data is stored.) To close CD-R/RW media, the following window will appear.

  • Page 105: Cd Formatting Using Incd S/W

    CD Formatting Using InCD S/W CD Formatting Using InCD S/W [CD Formatting Using InCD S/W] • When trying to back up data in an unformatted CD or receiving an error message after trying to back up data, format the CD by the following procedure: •...
  • Page 106 • Set the CD name. (If you do not want to define the CD name, simply do not enter the name.) After entering the CD name, click on the “Finish” button. • The following is when formatting is being made. (After formatting is completed, the next step will be automatically executed.)
  • Page 107 • After the CD is completely formatted, the following window will appear. (Click on the “Confirm” button to complete formatting.) • After the CD is completely formatted, continue backup by the same method as those of the hard disk or movable drives (DVD-RAM, ZIP, MOD, ORB, etc.) (Refer to Page 28.) •...

  • Page 108: System Setting For Using 2Way Audio Function

    System Setup for 2Way Audio Function System Setup for 2Way Audio Function [ Setting volume function for 2Way Audio] • In order to use 2Way audio function, you need to designate yes or no selection for ‘microphone’ to receive voice from voice input coarse from “Record” window. •...
  • Page 109 Select ‘Option Properties’ when recording control window is executed. Select ‘Microphone’ from “Properties” window and click [OK]. Select Microphone’ from “See following volume control“ list then click [OK]. It should be setup as ‘Microphone’ from “Properties” window in order to use 2Way Audio function.
  • Page 110 [High class setting of microphone input for 2Way Audio function] • For 2Way Audio function, you must set the microphone volume function as shown below. • From a condition where volume control for microphone input is maximized but microphone’s input signal is weak, following setup will amplify the input signal.
  • Page 111 • ‘Advanced’ button will appear under applicable columns when you select ‘Option -> Advanced Controls • You can go to ‘Advanced Controls for Microphone’ by clicking ‘Advanced’ on ‘Mic’ taps in ‘Volume Controls’. • Please adjust the options to fit into your system and check the sound output from ‘Other Controls’.
  • Page 112 [Tips] 2Way Audio Function will not work if, ☞ Your voice will not transmit to receiver if ‘microphone’ is not selected from “ Recording Control” 2Way Audio cannot be connected from Site to center (2Way Audio Connection is possible from center to Site) 2Way Audio function cannot be used if center is not connected to site.
  • Page 113 Warranty Guide Warranty Guide This product has passed thorough quality control and test, and if this get broken during normal use we provide 12 months warranty service. Warranty Guide Check this warranty sheet first. Please contact the distributor after checking out any defect in the product. The standard for repairing, replacement or reimbursement follows Customer Warranty Content Any defect under normal use within the warranty service period we give you free repair service...
  • Page 114 Kodicom Co., Ltd. Address : 5ch floor, A Dong, SK Twin Tower, 345-9, Kasan Dong Keumcheon-Ku, Seoul 153-023, Korea TEL : 82 – 2 – 2193-1740 FAX : 82 - 2 – 579-8419 Homepage : www.kodicom.com E-MAIL Address : sales@kodicom.com Korea Digital Communication Co., Ltd.

Table of Contents