Mitsubishi Electric M800 Series Manual page 9

UNIQUE CUSTOMIZATION
UNIQUE CUSTOMIZATION
A high level of screen customization is attainable more easily in a shorter period of time.
Highly scalable hardware and advanced drawing application make it possible to increase the added value of machine tools.
Possible to customize the
key type and layout
Possible to add and erase original application(s)
M800W Series is equipped with a 19-type vertical display with a two-split multi-window screen.
Home application in the lower half can freely be customized.
Additional SD memory card interface on backside of display.
An SD card can store large-capacity machining programs and custom screen data.
Selective display
Possible to arrange the menus Possible to change part of the items on the Monitor screen
Standard screens can be customized using the selective display and rearranging menus.
Screens matching operators' preferences and needs enable even greater ease of use.
Wide-ranging items to set
Possible to set the tool data to distinguish
tools such as tool name, tool ID, and number
of utes.
All of the data can be read and written
through machining program or ladder logic.
Addition of custom data
Custom data can be added. It is also possible
to specify the item name.
Tool-related information is collected and centrally managed on the Tool Management Screen.
15
A wide range of setting items such as tool name and tool ID are readily available.
It is also possible to add custom data.
19-type vertical display
M800W
boosts the added value of
machine tools
The display shows the standard CNC
screen on the upper half, while offering
the lower half (home application) to be
Possible to customize
freely customized. It is also possible to
the operation panel to
machine tools
add some originality to machines to
increase their added value. However, it
is dif cult to design the whole screen at
the same time. This screen layout can
satisfy such needs.
Combined with customers' ideas, the
possibilities are in nite.
M800S M80
Support for large-capacity
SD card interface in display unit
custom data using the SD
Large-capacity machining program
memory on the back of
Custom screen data
Backup data
display
The panel-in type CNC with integrated
display has the SD card interface on
the back of the display.
SD card can accommodate large-capacity
machining programs, and large-capacity
graphic data for custom screens, which
M800W M800S M80
l e a d s t o i n c re a s e d p o s s i b i l i t i e s o f
customization.
Customize the standard
screens as per the
preference of operators
Each operator has their own set of
frequently used menus. This CNC
allows operators to rearrange their
menus and hide any unused ones so
they can easily navigate to their desired
screen.
M800W M800S M80
T h i s C N C h a s a f u n c t i o n c a l l e d
Selective Display, which enables partial
customization of the Monitor screen.
Operators can constantly view and
monitor Tool offset, Work offset,
Common variable or other commonly
used functions.
REINFORCED FUNCTIONAL
SAFETY
M800/M80 Series provides a range of safety features collectively called the Smart Safety Observation Function.
This function has achieved full conformity with the safety standards
that cover the entire system including CNC, drive, I/O, sensors and communication.
Smart safety observation function
Safety-related I/O observation Emergency stop observation
Safely-Limited Speed (SLS) Safely-Limited Position (SLP)
Safe Operating Stop (SOS) Safe Speed Monitor (SSM)
Safe Brake Control/Safe Brake Test (SBC/SBT) Safe Cam (SCA)
Safe Stop (SS1/SS2) Safe Torque Off (STO)
Functional safety system
can be configured easily.
Not required
Safety
communication
Door
signal
Remote Operation panel
I/O unit I/O Unit
Safety I/O
Emergency
stop
Capable of monitoring redundant Redundant two-channel
door and emergency stop signals STO is built into the
with no need for dedicated safety drive, making it possible
circuit to use less wiring
Compliant with a range of safety standards,
equipped with the drive safety features required for machine tools
The Smart Safety Observation Function conforms to EC
Machinery Directive (2006/42/EC) and meets the
following safety standard requirements. The function
has also obtained the Type Approval Certi cate from
TÜV SÜD (German certi cation authority) with regard to
the conformity with the safety standards.
Compatible functional/product safety standards
EN ISO 13849-1 : 2008 (PLd, Cat.3) IEC 61508-1~3 : 2010 (SIL 2) EN 62061 : 2005 (SIL CL 2)
EN 61800-5-1 : 2007 EN 60204-1 : 2006
REINFORCED FUNCTIONAL SAFETY
Safety communication enables
the use of wire-saving con gurations
Drive Power supply
unit unit
Safety
communication
CNC
Not required
Not required
Motor
Equipped with the
safety-compatible sensor
16