Radio Setup - Samsung HT-J4100 User Manual

Settings

Radio Setup

• To listen to the radio, you must connect the
supplied FM antenna.
Operating the Radio with the Remote Control
1. Press the FUNCTION
2. Tune to the desired station.
• Preset Tuning 1 : Press the 5 button to select
PRESET, and then press the
DOWN button to select a preset station.
- Before you can tune to preset stations, you
must add preset stations to the product's
memory.
• Manual Tuning : Press the 5 button to select
MANUAL, and then press the
DOWN button to tune in to a lower or higher
frequency.
• Automatic Tuning : Press the 5 button to
select MANUAL, and then press and hold the
TUNING UP, DOWN
to automatically search the band.
Selecting Mono or Stereo
Press the MO/ST button.
• Each time you press the button, the sound switches
between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory.
1. Press the FUNCTION
2. Press the TUNING UP,
FM frequencies, and then select <89.10>.
3. Press the TUNER MEMORY
button at the bottom of the remote).
4. Press the TUNER MEMORY
about 5 seconds. The station is stored in memory.
✎
If you press the TUNER MEMORY
repeatedly without changing the station, the
inputted station may be overwritten.
button to select FM.
TUNING UP,
TUNING UP,
button for a few seconds
button to select FM.
DOWN button to scroll the
button (the yellow C
button again within
button
16
5. To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the
UP, DOWN button.
✎
To delete all Preset FM stations at once, press the
TITLE MENU button for about 5 seconds in FM
Manual mode until DEFAULT PRESET appears
on the display.
Recording FM Radio
You can record your favorite radio broadcast on a USB
storage device.
1. Insert a USB device into the USB jack on the front
of the product.
2. Press the FUNCTION
then press the TUNING
select the station you want to record.
3. Press the RED (A)
recording process begins.
• The recorded time is displayed on the left and
the recording time still available, based on the
amount of free space in the USB storage device,
is displayed on the right.
4. Press the EXIT button to finish your recording. The
recording is stopped and saved as an .mp3 file at
the same time. To play the recorded file, refer to
"Playing Files on a USB Device".
✎
The recorded file is saved in the Tuner folder which
is created automatically.
✎
Only the (OPEN/CLOSE),
MUTE, and VOLUME
while FM radio is being recorded.
✎
If you don't press any buttons while recording, the
screen saver will be enabled.
✎
Sound effects, such as DSP, EQ, etc., are not
recorded during FM radio recording.
✎
The radio is recorded at a set, default volume
even if you change the volume or press the
button during the recording process.
✎
If you remove the USB device or Power Cable
during the recording process, the portion of the
file which has already been recorded may not play
back.
- English
TUNING
button to select FM, and
UP, DOWN button to
button to start recording. The
(POWER), EXIT,
+/-, buttons are operable
MUTE