Siemens 5TC1585 Operating Instructions Manual page 7

Setting the MODE (fully or semi-automatic) with staircase light function
Staircase light function – corridor off/corridor on
With the corridor off staircase light function the light can be switched on and off manually using the button at any time. With
corridor on it can be switched on manually but not switched off. The light will not be switched off again until after the set
time delay.
Configuration type – auto/man
auto = fully automatic
The lighting is switched on and off automatically (based on presence, absence and brightness)
man = semi-automatic
The lighting is always switched on manually. It is switched off by the detector.
Manual operation using the button (internal or external)
The button can be used to manually switch the lighting at any time.
Switching on manually
When the button is pressed briefly, the light switches on for a certain time (depending on the duration of motion and the set
time delay).
Switching off manually
Normal
Operation
If the light is switched on, it can be switched off for a certain time by briefly pressing the button (depending on the duration
of the motion and the set time delay). Afterwards, the detector returns to normal operation.
> 30 s + set follow-up
time
> 30 s + set follow-up Normal
time Operation
7/9