Advertisement
Master/slave parallel switching (3-wire detector)
If the detection area covered by a single detector is insufficient (in large rooms), then several detectors can be
operated in parallel by connecting the P terminals. The master 5TC1585 measures brightness and controls the
lighting. The other detectors, slaves 5TC1586, merely provide presence information.
A maximum of 6 detectors can be connected over a length of 50 m.
Installation
For installation in device housing, concealed housing size 1.
Observe the recommended installation height of 0.8 m – 1.2 m!
Ensure that there are no obstructions as infrared rays cannot pass through solid objects.
The detector is not suitable for intruder alarm systems!
Detection Area
5TC1585
4/9
5TC1586
5
Advertisement
