Executive Override; Call Forwarding - Busy Line - NEC UNIVERGE SV9300 Series User Manual

EXECUTIVE OVERRIDE

This feature allows selected users to override a busy condition
on a called terminal.
The feature key is set by system data setting at
initial installation. For details, please contact the
system administrator.
(1) Call in progress.
(2) Override
The terminal "b" is talking with the terminal "c", and the terminal
"a" is going to override the connection.
1.
Terminal "a" dials 201. (The called party is a call
in progress.)
You will receive a busy tone.
2.
Press Executive Override feature key.
You will receive a warning tone.
Talking three parties.
FEATURE OPERATION

CALL FORWARDING - BUSY LINE

This feature permits a call to a busy extension to be routed to a
designated terminal.
TO SET CALL FORWARDING- BUSY
LINE
This feature is set by Soft key or feature key.
The feature key is set by system data setting at
initial installation. For details, please contact the
system administrator.
1.
Press the Soft key (>>>>) repeatedly
display shows "FDN" when Soft key is used.
2.
Press Soft key (FDN) or Call Forwarding - Busy
Line feature key.
3.
Dial the desired target terminal number.
4.
After 4 seconds, return back to the idle screen
automatically. (or Press Speaker key)
Speaker key lamp goes off.
Line key lamp goes off.
TO VERIFY
1.
Press Soft key (FDN) or Call Forwarding - Busy
Line feature key
The terminal number of the forwarding destination
is displayed on the LCD.
TO CANCEL
1.
While being set the Call Forwarding - Busy Line,
2.
Press the Soft key (>>>>) repeatedly
display shows "FDN" when Soft key is used.
3.
Press Soft key (FDN) or Call Forwarding - Busy
Line feature key.
4.
Press "* " key.
5.
After 4 seconds, return back to the idle screen
automatically. (or Press Speaker key)
Speaker key lamp goes off.
Line key lamp goes off.
59
until
until