Belt Replacement - NEW BRUNSWICK SCIENTIFIC C2 Classic Manual To Operations

7.3 Belt Replacement

To replace the drive belt of the shaker:
1. Turn off the unit, disconnect the power cord from the power source.
2. Remove the platform if equipped. Set the platform and knobs aside.
3. Remove the Phillips head screws that secure the
SUBPLATFORM
PHILLIPS HEAD
SCREWS (4)
4. Lift and remove the
New Brunswick Scientific Co., Inc.
.
Figure 5: Mover Plate Removal
BELT
from the unit.
MOVER PLATES
to the
MOVER PLATES
MOVER PLATES
29
(2)
SUBPLATFORM
User's Guide