System Board; Removing The System Board - Dell OptiPlex 7000 Micro Service Manual

Next steps
1. Install the WLAN card.
2. Install the side cover.
3. Follow the procedure in

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the solid-state
4. Remove the WLAN card.
5. Remove the fan assembly.
6. Remove the heat sink.
7. Remove the memory module.
8. Remove the speaker .
9. Remove the processor.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
65 W system board
1. M.2 WLAN connector
3. Coin-cell battery
after working inside your
before working inside your
drive.
computer.
computer.
2. M.2 SSD PCIe connector (2230/2280)
4. Optional video connector (VGA Port/DisplayPort 1.4a
(HBR3)/HDMI 2.0b Port)
Removing and installing components 51