Dell OptiPlex 7000 Micro Service Manual page 50

About this task
The following images indicate the location of SMA antenna and provide a visual representation of the removal procedure.
Steps
1. Remove the fillers on the side cover.
2. Tilt the SMA antenna assembly. Align and place the antenna bracket on the system board.
3. Insert the SMA antenna assembly in the back view opening.
4. Align the screw hole on the SMA antenna assembly with the screw hole on the back view.
5. Replace the screw (M3x3MM) that secures the SMA antenna assembly to the chassis.
6. Route the antenna-cables through the routing guides on the chassis.
50 Removing and installing components