C Resetting Password - Huawei SUN2000 Series User Manual

SUN2000-(12KTL-25KTL)-M5 Series
User Manual
Step 1 Check that the AC and DC sides of the inverter are both powered on, and
indicators
Step 2 Turn off the AC switch, set the DC SWITCH at the bottom of the inverter to OFF,
and wait until all indicators on the inverter panel turn off.
Step 3 Complete the following operations within 4 minutes:
1.
2.
3.
Step 4 Wait until the three green LEDs on the inverter panel blink fast and then the three
red LEDs blink fast, which indicates that the password is restored.
Step 5 Reset the password within 10 minutes. (If no operation is performed within 10
minutes, all parameters of the inverter remain unchanged.)
1.
2.
3.
Step 6 Set router and management system parameters to implement remote
management.
----End
You are advised to reset the password in the morning or at night when the solar
irradiance is low.
Issue 01 (2022-06-15)
and are steady green or blinking slowly for more than 3 minutes.
Turn on the AC switch and wait for about 90s or until the inverter indicator
blinks.
Turn off the AC switch and wait about 30s or until all LED indicators on the
inverter panel turn off.
Turn on the AC switch and wait for about 30s or until all LED indicators on
the inverter panel blink and then turn off after about 30s.
Wait until the indicator
Connect to the app using the initial WLAN hotspot name (SSID) and initial
password (PSW), which can be obtained from the label on the side of the
inverter.
On the login page, set a new password and log in to the app.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
C
Resetting Password
blinks.

C Resetting Password

83