Huawei SUN2000 Series User Manual page 11

SUN2000-(12KTL-25KTL)-M5 Series
User Manual
●
●
Drilling Holes
When drilling holes into a wall or floor, observe the following safety precautions:
●
●
Moving Heavy Objects
●
●
Issue 01 (2022-06-15)
Ensure that the ladder is securely positioned. The recommended angle for a
ladder against the floor is 75 degrees, as shown in the following figure. An
angle rule can be used to measure the angle.
When climbing a ladder, take the following precautions to reduce risks and
ensure safety:
– Keep your body steady.
– Do not climb higher than the fourth rung of the ladder from the top.
– Ensure that your body's center of gravity does not shift outside the legs
of the ladder.
Wear goggles and protective gloves when drilling holes.
When drilling holes, protect the equipment from shavings. After drilling, clean
up any shavings that have accumulated inside or outside the equipment.
Be cautious to avoid injury when moving heavy objects.
When moving the equipment by hand, wear protective gloves to prevent
injuries.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
5