Turning Off The Power; Watching 3D Video Images - Sony VPL-VW1000ES Operating Instructions Manual

Projectors: front projector
Hide thumbs Also See for VPL-VW1000ES:
Table of Contents

Advertisement

Turning Off the Power

1
Press the
?
/
1
(ON/STANDBY)
button.
A message "POWER OFF?" appears on
the screen.
2
Press the
?
/
1
(ON/STANDBY)
button again before the
message disappears.
The lens protector will close. Be careful
not to catch your fingers or any objects.
The ON/STANDBY indicator flashes in
green and the fan continues to run to
reduce the internal heat. First, the ON/
STANDBY indicator flashes quickly,
during which you will not be able to
light up the ON/STANDBY indicator
with the ?/1 (ON/STANDBY) button.
The fan stops and the ON/STANDBY
indicator changes from flashing green to
remaining red.
The power is turned off completely, and
you can disconnect the AC power cord.
Note
Never disconnect the AC power cord while
the indicator is flashing.
You can turn off the unit by holding the ?/1
(ON/STANDBY) button for about 1 second,
instead of performing the above steps.
28
Watching 3D Video
Images
You can enjoy powerful 3D video images,
such as from 3D games and 3D Blu-ray
Discs, using the supplied 3D glasses.
1
Turn on the HDMI equipment for
3D compatibility connected to
the unit, then play the 3D
content.
For details on how to play 3D content,
refer to the operating instructions for the
connected equipment.
2
Turn on the unit and project the
3D video image onto the screen.
For details on how to project the image,
see "Projecting the Picture" (1 page
27).
3
Turn on the 3D glasses, and
then put them on so that they fit
comfortably.
For details on how to use the 3D glasses,
see "Using the 3D Glasses" (1 page
29).
Tips
• The factory default setting for "2D-3D
Display Sel." is "Auto" to allow projecting
3D video images automatically when the unit
detects 3D signals.
• To convert 3D video images to 2D video
images, set "2D-3D Display Sel." to "2D"
(1 page 52).
Notes
• It may not be possible to display 3D video
image, depending on the type of signal. Set
the "2D-3D Display Sel." to "3D," and "3D
Format" to "Side-by-Side" or "Over-Under"
to suit the format of the 3D content you want
to watch (1 page 52).
• Use the 3D glasses within the
communication range (1 page 30).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents