To Connect To Equipment With Component Video Output Connectors - Sony VPL-VW1000ES Operating Instructions Manual

Notes
• Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D
video and 4K video may not be displayed properly.
• When connecting an HDMI cable to the unit, make sure the
input of the unit and the
• If the picture from equipment connected to the unit with an HDMI cable is not correct, check the
settings of the connected equipment.
To connect to equipment with component video output
connectors
Right side of the unit
: Video signal flow
v
mark on the connector of the cable is set at the same position.
Component video cable (not supplied)
V
mark on the upper part of the HDMI
AV amplifier
Equipment with component
video output connectors
Speakers
23