Table of Contents
Advertisement
TROUBLESHOOTING
EN
PROBLEM
The electric zero turn
mower fails to drive
when the two steering
levers are pushed
forward or backward
at the beginning.
Steering level icon blinks
The electric zero turn
mower stops driving.
38
ZERO TURN RIDING MOWER — ZT4200E-L
CAUSE
◾
The combined Ah of the
inserted batteries is less than
15 Ah.
◾
The parking brake pedal is
set in the braking position.
◾
The steering levers are not
in the open position when
starting the mower.
◾
The operator is not sitting on
the seat.
◾
The seat switch is not
connected correctly.
◾
Under extreme cold weather,
the driving function may not
start successfully due to the
low temperature protection.
◾
Steering levers require a
"reset".
◾
The electric controlling
components of the steering
levers are failed.
◾
The seat switch got
disconnected during driving
on a rough terrain.
SOLUTION
◾
In order to start this mower, EGO batteries totaling
15Ah (2 X BA4200/BA4200T) or more are required.
For best performance, we recommend use of
batteries that total 30Ah or more.
◾
Fully depress the parking brake pedal to release it
from the braking position.
◾
Return the steering levers to the open position and
restart the mower.
◾
Only when the operator correctly sits on the seat,
can he operate the mower.
◾
Remove the battery from the mower and
disassemble the seat in the reverse order of the
instructions in section "INSTALLING THE SEAT" in
this manual to inspect the seat switch connection.
Reassemble the seat and follow the instructions in
"STARTING THE ELECTRIC ZERO TURN MOWER"
to restart the mower to see if the mower can be
started. If not, contact a qualified service technician
for repair.
◾
Always store the mower and battery in warm
environment. Restart the mower when it is warmed
up. Please do not make repeated attempts under
extreme cold weather which may damage the
machine. Recommended operating temperature is
0°C-40°C.
◾
Return the steering levers to the open position and
restart the mower.
◾
Contact a qualified service technician for repair.
◾
Remove the battery from the mower and
disassemble the seat in the reverse order of the
instructions in section "INSTALLING THE SEAT" in
this manual to inspect the seat switch connection.
Reassemble the seat and follow the instructions in
"STARTING THE ELECTRIC ZERO TURN MOWER"
to restart the mower to see if the mower can be
started. If not, contact a qualified service technician
for repair.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Z6 ZTR and is the answer not in the manual?
Questions and answers
WHAT IS THE WEIGHT LIMIT FOR AN OPERATOR ON THE 42 INCH DECK MOWER?
what type of grease for the mower blade flange? how do you apply the grease and how much.
The specific type of grease is not mentioned in the provided context. However, it states to check the grease condition inside the cutting blade flange. This implies that grease should be applied to the blade flange area to ensure proper function. The grease should be suitable for mower blade applications—typically, a high-quality, waterproof, multi-purpose or lithium-based grease is used for such parts. Apply it by removing the blade flange and coating the area where the blade connects to the flange. Reassemble securely after greasing.
This answer is automatically generated