Using.the.air.purifier; Understanding The Air Quality Light - Philips 4000i Series User Manual

Note:
• Enterprise/Additional webpage authentication networks are not supported.
• This instruction is only valid when the air purifier is being set up for the first time. If the network has
changed or the setup needs to be performed again, see Chapter "Reset the Wi-Fi connection" on
page 6�
• If you want to connect more than one air purifier to your smartphone or tablet, you have to do this
one by one.
• Make sure that the distance between your smartphone or tablet and the air purifier is less than 10 m
without any obstructions.
• This App supports the latest versions of Android and iOS. Please check www.philips.com/cleanhome
for the latest update of supported operating systems and devices.
Reset.the.Wi-Fi.connection
Note:
• Reset the Wi-Fi connection when your default network has changed.
1
Put the plug of the air purifier in the power socket and touch
2
Touch and simultaneously for 3 seconds until you hear a beep.
The air purifier goes to pairing mode.
»
The Wi-Fi indicator
»
3 Follow the steps 3-4 in "Setting.up.the.Wi-Fi.connection.for.the.first.time" section.
4 Using the air purifier

Understanding the air quality light

The air quality light automatically goes on when the
air purifier is switched on, and lights up all colors
in sequence. After approximately 30 seconds, the
particle sensor selects the color that corresponds to
the surrounding air quality of airborne particles.
The color of the air quality light is determined by
the highest risk index among PM2.5, IAI and Gas
readings.
PM2.5
AeraSense sensing technology accurately detects and
quickly responds to even the slightest particle change in the
air. It provides you with reassurance with real-time PM2.5
feedback.
Most of the indoor air pollutants fall under PM2.5 –
which refers to airborne particle pollutants smaller
than 2.5 micrometers. Common indoor sources of fine
particles are tobacco smoke, cooking, burning candles.
Some airborne bacteria and the smallest mold spores, pet
allergen and dust mite allergen particles also fall under PM2.5.
EN
6
blinks orange.
Air quality light color
Blue
Blue-purple
Purple-red
Red
to turn on the air purifier.
Air quality level
Good
Fair
Poor
Very poor
PM2.5.level Air quality light color
≤12 Blue
13-35 Blue-purple
36-55 Purple-red
>55 Red