• If the power cord is damaged, you must have it replaced by Philips, a service center authorized by Philips, or similarly qualified persons in order to avoid a hazard�...
Page 22
• Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance� • Only use the original Philips filters specially intended for this appliance� Do not use any other filters� • Combustion of the filter may cause irreversible human hazard and/or jeopardize other lives�...
(Rn)� It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals� • Do not use the filter unauthorized by Philips in order to make sure normal running of the appliance, the air purification performace and the safety of the filter material�...
2 Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www�philips�com/welcome� Product overview Control panel Air outlet Particle sensor Gas sensor NanoProtect filter Pro S3 (FY4150/00)
3 Getting started Installing the filter Remove all packaging of the filter before first use� Note: Make sure the air purifier is unplugged from the electrical outlet before installing the filter� Pull the back cover and remove it from the appliance� Pull the filter from the appliance�...
Wi-Fi connection Note: • If you want to connect more than one air purifier to your smart device, you have to do this one by one� Complete the set up of one appliance before you turn on the other appliance� •...
4 Using the air purifier Understanding the air quality light The air quality light automatically Air quality light color Air quality level goes on when the air purifier is switched on, and lights up all colors Blue Good in sequence� After approximately Blue-purple Fair 30 seconds, the particle sensor...
Turning on and off Note: • For optimum purification performance, close doors and windows� • Keep curtains away from the air inlet or air outlet� Put the plug of the air purifier in the power socket� Touch to switch on the air purifier� »...
Sleep mode ( Sleep Mode In Sleep mode, the air purifier operates quietly at a low speed� After 3 seconds, the screen lights off� Switching the display indicator Note: The PM2�5 level is displayed on the central of the screen by default� Particulate Matter 2.5 PM2.5...
Checking the filter status • Touch the filter status check/reset button to check the filter service life status� » The percentage of remaining service life of the filter displays on the screen� Icon color Filter life indication Display (%) Blue Optimal service life 16-100 Filter status...
Cleaning the body of the air purifier Regularly clean the inside and outside of the air purifier to prevent dust from collecting� Wipe the fabric surface gently with a damp cloth� Use a soft, dry cloth to clean both the interior and exterior of the air purifier and the air outlet�...
Cleaning the surface of the filter PM2.5 Clean surface of lter and long press to reset. Filter alert light status Action The filter cleaning alert Clean the surface of the filter with a vacuum displays on the screen Switch off the air purifier and unplug from the power socket� Pull the back cover and remove it from the appliance�...
Replacing the filter Understanding the healthy protection lock This air purifier is equipped with a filter replacement indicator to make sure that the air purification filter is in optimal condition when the air purifier is operating� When the filter need to be replaced, the filter replacement alert lights up red�...
Switch off the air purifier and unplug from the power socket� Pull the back cover and remove it from the appliance� Pull the filter from the appliance� Remove all packaging materials of the new filter� Put the new filter into the appliance� Reattach the back cover�...
6 Storage Turn off the air purifier and unplug from the power socket� Clean the air purifier, particle sensor and the surface of the filter (see chapter ‘Cleaning and maintenance’)� Let all parts air dry thoroughly before storing� Wrap the filter in air tight plastic bags� Store the air purifier, filter in a cool, dry location�...
Page 37
Philips dealer or an authorized Philips service center� The filter may produce smell after being used for a while because of the absorption of indoor gases� It’s recommended that you reactivate the filter by putting it in direct sunlight for repeated use�...
Page 38
Problem Possible solution The screen • Shut off the power first, then install the back cover displays that the back cover is correctly� Connect the appliance with power and retry� opened� Error code "E1" • The motor has malfunctions� Contact the Consumer displays on the Care Center in your country�...
8 Guarantee and service If you need information or if you have a problem, please visit the Philips website at www�philips�com or contact the Philips Consumer Care Center in your country (you can find its phone number in the worldwide guarantee leaflet)�...