Connect To Power; Pair Up With The Subwoofer - Philips 7000 Series User Manual

Hide thumbs Also See for 7000 Series:
Table of Contents

Advertisement

Connect to power

Before connecting the AC power cord,
ensure you have completed all other
connections.
Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the unit.
1
Connect the mains cable to the AC~
socket of the unit and then into a
mains socket.
Connect the mains cable to the AC~
2
socket of the subwoofer and then into
a mains socket.
For EU
For UK
For EU
For UK
Power cord quantity and plug type vary
*
by regions.

Pair up with the subwoofer

Automatic pairing
Plug the soundbar and the subwoofer
into the mains sockets and then press on
the unit or remote control to switch the
unit to ON mode. The subwoofer and
soundbar will automatically pair.
Determine the status based on the
wireless subwoofer indicator.
LED State
Status
Fast blink
Subwoofer in pairing mode
Constant on
Connected / Pairing successful
Slow blink
Connection / Pairing failed
Tips
Do not press Pair button on the rear of the
Subwoofer, except for manual pairing.
Manual pairing
If no audio from the wireless subwoofer
can be heard, manually pair up the
subwoofer.
1
Unplug both power cables of
subwoofer and soundbar, and then
plug them in again after 3 minutes.
2
Press and hold the Pair button on the
rear of the Subwoofer for 5 seconds.
The indicator on the subwoofer will
rapidly blink.
3
Press
on the soundbar or remote
control to switch on the soundbar to
enter pairing mode automatically.
4
The indicator on the subwoofer will
become solid in orange when
successful.
5
If the indicator still keeps blinking,
repeat step 1-3.
Tips
The subwoofer should be within 6 m of the
soundbar in an open area (the closer the
better).
Remove any objects between the subwoofer
and the soundbar.
If the wireless connection fails again, check if
there is a con�ict or strong interference (e.g.
interference from an electronic device) around
the location. Remove these con�icts or strong
interferences and repeat the above procedures.
13
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tab7207Tab7207/10

Table of Contents