Steps
1. Insert the intrusion switch into its slot and slide the switch to secure it into the slot.
2. Connect the intruder cable to the connector on the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
SD card reader (optional)
Removing the SD card reader
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
About this task
The following image indicates the location of the SD card reader and provides a visual representation of the removal procedure.
76
Removing and installing components
after working inside your
before working inside your
computer.
computer.