Dell OptiPlex 7000 Tower Service Manual page 113

Table 15. System setup options—System Management menu
System Management
Service Tag
Asset Tag
Wake on LAN/WLAN
Auto on Time
Intel AMT Capability
Enable Intel AMT Capability
MEBx Hotkey
USB Provision
Enable USB Provision
SERR Messages
Table 16. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection
Numlock LED
Enable Numlock LED
Device Configuration Hotkey Access
Device Configuration Hotkey Access
Table 17. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Warning and Errors
Fastboot
Extend BIOS POST Time
Display the Service Tag of the computer.
Create a computer Asset Tag.
Enable or disable the computer to power on by special LAN signals when it
receives a wakeup signal from the WLAN.
By default, the Disabled option is selected.
Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Enable or disable the Intel AMT capabilty.
By default, the Restrict MEBx Access option is enabled.
Enable or disable MEBx hotkey.
By default, the option is disabled.
Enable or disable the Intel AMT provisioning using the local provisioning file
through a USB storage device.
By default, the option is disabled.
Enable or disable SERR messages.
By default, the option is enabled.
Enable or disable the keyboard error detection.
By default, the option is enabled.
Enable or disable Numlock LED.
By default, the option is enabled.
Enable or disable users to access device configuration by using hotkeys.
By default, the option is enabled.
Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
Enable to set the speed of the boot process.
By default, the Thorough option is enabled.
Set the BIOS POST time.
BIOS setup 113