Cleaning The Motor Protection Filter; Cleaning The Outlet Filter - Samsung DJ68 Operating Instructions Manual

5

CLEANING THE MOTOR PROTECTION FILTER

Take out both the dust bin and the
dust pack.
6

CLEANING THE OUTLET FILTER

Press the fixed frame
part at the back of the
main body to remove.
- IF YOU HAVE A PROBLEM
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
Vacuum cleaner does not
pick up dirt.
Low or decreasing suction
Pull out the HEPA Filter
using the tab.
CAUSE
No power supply.
Thermal cut-out.
Nozzle, suction hose or tube
is blocked.
Check that the cord is not
twisted or wound unevenly.
Crack or hole in hose.
Filter is full of dust.
EN-8
Remove the motor protection filter from
the vacuum cleaner.
Shake and tap the dust from it and put
back in machine.
Dust the HEPA filter.
Check cable, plug and socket.
Leave to cool.
Check for blockage and
remove it.
Pull the cord out 2-3m and
push the cord rewind button.
Check hose and replace if
required.
Please check filter and, if
necessary, clean as illustrat-
ed in the instructions.
Put the HEPA filter into
the main body until you
hear a 'click' sound.
REMEDY 0