Kaba Ilco 790 Series Installation Sheet page 2

790/79 Series Rework Installation Sheet
Connect privacy switch to PCB. Location
7
as shown
Assemble new cam. Move switch lever
10
(see arrow) first and assemble cam after
Side contact
Place Cam
orientation as shown
Assemble back plate with 5 screws
12
PK3612_07_12
All manuals and user guides at all-guides.com
Assemble the switch holder, pass the wires
8
underneath it. Make sure the screw head is
underneath as shown.
Remove protective bracket
11
Be careful that the spring does not jump and is still in its position
5X
Align cam &
back plate
Screw Head
Assemble battery pack with screw
13
Pass cables
through back
plate hole
Assemble privacy switch on switch holder
9
Switch lever orientation
Align marks
1.877.468.3555
www.ilcosupport.com