Diesel-Emission Test With Mdo2-Lon; 5-Gas Test With Mgt 5 - MAHA SA 2 Euro Operation & Maintenance Manual

PC Program Operation
4 Function test right
a. Drive the vehicle onto the roller set in a reverse manner.
b. Press the clutch or place the gear into idle.
Place the automatic transmission to Neutral-Position (N) .
c. Repeat Point 3.a. and 3.b. for the right hand side.
5 Return to the standard mode
Select standard mode with <F9> .
4.8.5

Diesel-Emission Test with MDO2-LON

1 When the MDO2-LON is correctly set the
main menu appears with a box listed as
„F4" and the symbol of the gas tester.
2 Use <F4> to start the MDO2-LON software.
It will take a few seconds until the
measurement screen appears for the diesel
emission test.
Eurosystem continues to run in the
background.
3 See the MDO2-LON operating manual and
software operation for instructions of Diesel
Emission testing.
4.8.6

5-Gas Test with MGT 5

1 After correctly installing the MGT 5 software
the main menu appears with an extra box
"F11" and the gas tester symbol.
2 Use <F11> to start the MGT 5 software. It
takes a few seconds until the measurement
screen for the gas test appears.
Eurosystem continues to run in the
background.
3 See the MGT 5 operation manual for
instruction on how to conduct the test and
operate the software.
D1 E101BA1-GB09
Eurosystem / Profi-LON
4.67