Table of Contents
Advertisement
10
Place the multi-function slider
functions as the microphone for the dictation/voice recognition software
on the PC. In the display
In the meanwhile you can adjust the record sound volume level between the values
of 000 (muted) and 250 (maximum volume).
To increase the record sound volume: Press the function button B
press of the button you raise the record sound volume by a step. For a faster raising
of the record sound volume you can also hold down the function button B
To reduce the record sound volume: Press the function button C
of the button you reduce the record sound volume by a step. For a faster reduction of
the record sound volume you can also hold down the unction button C
The currently adjusted record volume level is indicated for a few seconds in the display
To terminate PC microphone operation: Select, by pressing the function button A
»ESC«; In the display
screen: select, by pressing the function button A
8.8 Switch-off options
From the factory, this voice recorder is set so that after 10 minutes, and without a
button being pressed, it switches itself off automatically. Additionally, it can be set
so that ...
it automatically switches itself off after 30 minutes without a button being
Ú
pressed.
it can only be manually switched off by pressing the button »ON/OFF«
Ú
To carry out the settings:
40
h
is indicated:
q
PC Microphone
Record
the Menu is once again shown. To return to the start
q
at »
START«; the voice recorder now
Mode
VOL±
twice in succession, »ESC«.
w
ESC
: With each
e
e.
: With each press
r
r.
a
.
q
,
w
.
Advertisement
Table of Contents
